Dual Port NGFF Solid-State To SATA Serial Port Adapter Board 2 * M.2 To SATA 3.0 Expansion Card To USB External Cable

Hello dear friend, welcome to our store. Wishing you a pleasant shopping experience!Product DescriptionCan simultaneously insert 2 hard drives
But only one can be read at a time
NGFF2 starts working after the switch is turned upwards
NGFF1 starts working after the switch is turned down
Note that the switch position must be consistent with the hard drive you want to read.
For example, if you turn the switch to the nggf2 position to read nggf1, you will definitely not be able to read it!!
Supports hard drives: SATA protocol hard drives (NGFF) in m.2
be careful!!! M.2 hard drives that do not support nvme pci-e protocol use!!!User question 1: Can the two hard drives installed be of different brands
Answer: Two different brands of NGFF hard drives can be used.
User question 2: Is it possible to use only one hard drive slot
Answer: You can use only one hard drive. When using, be sure to turn the switch to the corresponding position
User question 3: Will it affect the transmission speed
Answer: The theoretical speed limit of NGFF hard drives is 6Gbps, and the compatibility between different brands, models, and computer devices varies. As a result, the actual transmission speeds vary. So there is no standard answer to this, you can try it yourself
User question 4: Is it possible to install and use an easy drive cable and hard drive case by oneself
Answer: Since the adapter card does not have a chip, there is no compatibility issue with the adapter card. It mainly depends on the compatibility between devices with chips and other components to ensure their usability. The main control chip used for the easy drive cable in our link has been tested and found to have good compatibility. Compatible with most devices, recommended for use in combination;
window.adminAccountId=2675475096;