DS213 Mini 4 Channels 100MSas Digital Pocket Portable Oscil

Overview:
DS213 is a "5-track 4-wave line" digital storage oscilloscope for general purpose engineering and electronic task based on ARM Cortex M3 core DS213 using FPGA to manage external control of ADC and data cache mode. It provides 4 application partitions to load and update up to 4 different application firmware. It also has an integrated 8 MB USB flash drive to store waveform data and update the system firmware. The oscilloscope code application layer is open source, and users can develop the oscilloscope firmware according to their needs.
Description::
Compact size, light weight, easy to carry and operate.
Waveform data can be stored, and waveform analysis and comparison are more efficient and intuitive.
Multiple trigger methods, support positive and negative edge trigger, logic trigger, pulse width trigger.
With built-in 8M USB disk, large storage capacity.


Specifications:
CPU: ARM Cortex M3
FIFO & Control: FPGA
ADC: HWD9288-100
Analog channels: 2 ( {CH_A} {CH_B} )
Digital channels: 2 ( {CH_C} {CH_D} )
Operation channel: INV {CH_A}, INV {CH_B}, {CH_A}+{CH_B}, {CH_A}-{CH_B}, {CH_C} & {CH_D}, {CH_C}
-
{CH_D}
Vertical Sensitivity: 10 mV-10 V / div (1-2-2-5 Step) (using x1 of the probe)
100 mV-100 V / div (1-2-2-5 Step) (using x10 of the probe)
Vertical Resolution: 8 bits
Storage depth : 4 channels, 4*4 K
Input coupling mode: DC, AC
± 400Vpp (using x10 of the probe)
Soft trigger type: positive and negative edge trigger, pulse width trigger, logic trigger
Trigger mode: automatic, standard, single, instant scan
Trigger Source: {CH_A} {CH_B} {CH_C} {CH_D}
Signal source: square wave 10Hz to 8 MHz, in total 20 changes and 3 sources of Vpp signal;
Sinusoidal / triangular / sawtooth wave: 10Hz to 20 MHz, in total 11 changes and 3 Vpp signal sources
Storage capacity: bulit-in 8M USB disk
File types: BMP,BUF, CSV
Automatic measurement type: maximum value, minimum value, crest value, average value, effective value, frequency, period, pulse width, duty cycle
Cursor measurement: time value, amplitude value
Display mode: (4 wave lines)
Line 1: {CH_A}, HIDE
Line 2: {CH_B}, HIDE
Line 3: {CH_C} REC_1, REC _ 2, REC _ 3, REC _ 4 hide
Line 4: {CH_D}, {CH_A} + {CH_B}, {CH_A} - {CH_B}, {CH_C} & {CH_D}, {CH_C} - {CH_D}, HIDE
Sampling mode: Real-time sampling
Sampling frequency: 100MSa / s
Battery: 1000mAh
Certificate: CE FCC
Weight: 296g/10.4oz
Size: 99.5*58.5*13.5mm/3.9*2.3*0.5inch
Model
DS213
MCU
STM32F103VE
ADC
HWD9288
Channel Number
2 analog channel +2 digital channel
AnalogBandwidth
15MHz
MaximumSampling Rate
100MSa/s
Maximum Storage Depth
4K
Horizontal Scanning Frequency
100nS/Div~1S/Div(1-2-5 Step)
VerticalSensitivity
10mv/Div~10V/Div(1-2-5 Step)
Input Impedance
1MΩ
CouplingMode
DC/AC
Trigger Type
up / down trigger
positive / negative pulse trigger
logic trigger
Automatic Adjustment Mode
No
OperationWaveform
INV A, INV B, A+B, A-B, C&D, C-D, RecA, RecB, RecC, RecD
SignalOutput
Square wave, sine wave, triangle wave, saw tooth wave
Trigger Mode
Auto, Normal, Single, Slow
MeasuredValue
Storage
Built-in 8M USB disk
Number of available APP quantity
2
Operation
Keys, Encoders
USB Interface
Micro USB
Battery
1000mAh
Screen Size
3inch
Screen Resolution
400*240
OpenSource Situation
Application layer open source
Certificate
CE/FCC


Package list:
1 * Mini Oscilloscope
1 * USB
1 * Screwdriver

Overview:
DS213 is a "5-track 4-wave line" digital storage oscilloscope for general purpose engineering and electronic task based on ARM Cortex M3 core DS213 using FPGA to manage external control of ADC and data cache mode. It provides 4 application partitions to load and update up to 4 different application firmware. It also has an integrated 8 MB USB flash drive to store waveform data and update the system firmware. The oscilloscope code application layer is open source, and users can develop the oscilloscope firmware according to their needs.
Description::
Compact size, light weight, easy to carry and operate.
Waveform data can be stored, and waveform analysis and comparison are more efficient and intuitive.
Multiple trigger methods, support positive and negative edge trigger, logic trigger, pulse width trigger.
With built-in 8M USB disk, large storage capacity.


Specifications:
CPU: ARM Cortex M3
FIFO & Control: FPGA
ADC: HWD9288-100
Analog channels: 2 ( {CH_A} {CH_B} )
Digital channels: 2 ( {CH_C} {CH_D} )
Operation channel: INV {CH_A}, INV {CH_B}, {CH_A}+{CH_B}, {CH_A}-{CH_B}, {CH_C} & {CH_D}, {CH_C}
-
{CH_D}
Vertical Sensitivity: 10 mV-10 V / div (1-2-2-5 Step) (using x1 of the probe)
100 mV-100 V / div (1-2-2-5 Step) (using x10 of the probe)
Vertical Resolution: 8 bits
Storage depth : 4 channels, 4*4 K
Input coupling mode: DC, AC
± 400Vpp (using x10 of the probe)
Soft trigger type: positive and negative edge trigger, pulse width trigger, logic trigger
Trigger mode: automatic, standard, single, instant scan
Trigger Source: {CH_A} {CH_B} {CH_C} {CH_D}
Signal source: square wave 10Hz to 8 MHz, in total 20 changes and 3 sources of Vpp signal;
Sinusoidal / triangular / sawtooth wave: 10Hz to 20 MHz, in total 11 changes and 3 Vpp signal sources
Storage capacity: bulit-in 8M USB disk
File types: BMP,BUF, CSV
Automatic measurement type: maximum value, minimum value, crest value, average value, effective value, frequency, period, pulse width, duty cycle
Cursor measurement: time value, amplitude value
Display mode: (4 wave lines)
Line 1: {CH_A}, HIDE
Line 2: {CH_B}, HIDE
Line 3: {CH_C} REC_1, REC _ 2, REC _ 3, REC _ 4 hide
Line 4: {CH_D}, {CH_A} + {CH_B}, {CH_A} - {CH_B}, {CH_C} & {CH_D}, {CH_C} - {CH_D}, HIDE
Sampling mode: Real-time sampling
Sampling frequency: 100MSa / s
Battery: 1000mAh
Certificate: CE FCC
Weight: 296g/10.4oz
Size: 99.5*58.5*13.5mm/3.9*2.3*0.5inch
Model
DS213
MCU
STM32F103VE
ADC
HWD9288
Channel Number
2 analog channel +2 digital channel
AnalogBandwidth
15MHz
MaximumSampling Rate
100MSa/s
Maximum Storage Depth
4K
Horizontal Scanning Frequency
100nS/Div~1S/Div(1-2-5 Step)
VerticalSensitivity
10mv/Div~10V/Div(1-2-5 Step)
Input Impedance
1MΩ
CouplingMode
DC/AC
Trigger Type
up / down trigger
positive / negative pulse trigger
logic trigger
Automatic Adjustment Mode
No
OperationWaveform
INV A, INV B, A+B, A-B, C&D, C-D, RecA, RecB, RecC, RecD
SignalOutput
Square wave, sine wave, triangle wave, saw tooth wave
Trigger Mode
Auto, Normal, Single, Slow
MeasuredValue
Storage
Built-in 8M USB disk
Number of available APP quantity
2
Operation
Keys, Encoders
USB Interface
Micro USB
Battery
1000mAh
Screen Size
3inch
Screen Resolution
400*240
OpenSource Situation
Application layer open source
Certificate
CE/FCC


Package list:
1 * Mini Oscilloscope
1 * USB
1 * Screwdriver