Double Universal Power Wall Socket with Dual Toggle Switches and White Tempered Glass Panel

Name

Double Universal Power Wall Socket with Dual Toggle Switches and White Tempered Glass Panel (also referred to as a 2-Gang Switched Universal Power Outlet or Double Glass Plate Multi-Standard Socket with Metallic Levers).

Description

This is a double-gang electrical wall outlet featuring a rectangular white tempered glass faceplate with clean, bevel-cut edges. It integrates two universal power receptacles paired with two chrome toggle lever switches placed centrally. The universal outlets accommodate a wide variety of global plug designs without requiring adapters, while each dedicated lever provides independent mechanical power control for its respective socket. Combining modern glass finish aesthetics with vintage lever control, it offers a stylish, high-capacity power solution for living rooms, bedrooms, offices, and hotel rooms.

Features & Highlights

Dual Universal AC Outlets: Multi-pin socket design accommodates international plug standards (UK, US, EU, AU, CN) for maximum appliance compatibility.

Independent Toggle Switches: Two solid chrome/metallic lever switches provide dedicated locals ON/OFF power isolation for each individual socket.

Tempered Glass Faceplate: High-gloss, scratch-resistant, non-fading white glass surface that is easy to wipe clean.

Safety Shutters: Equipped with internal protective safety shutters behind the socket apertures to prevent foreign objects from touching internal live contacts.

Flame-Retardant Construction: Rear housing constructed from high-grade fireproof PC material with high-conductivity copper terminal contacts.

Standard Double-Gang Fit: Designed to mount into standard rectangular double-gang wall back-boxes (typically 146mm x 86mm).

Installation Instructions

⚠️ Safety Warning: Always isolate the main electrical power supply at the circuit breaker panel prior to installation or servicing.

Power Isolation: Shut off the electricity supply to the socket circuit at the main breaker panel and verify the line is dead using a reliable voltage tester.

Remove Old Socket: Unscrew the existing double switch plate, pull it forward from the junction box, and disconnect the wiring.

Connect Wiring:

Connect the incoming Live Wire (L) to the designated Live input terminal on the switch block.

Connect the Neutral Wire (N) to the designated Neutral terminal on the socket module.

Secure the Earth Ground Wire (E / ⏚) to the central Earth terminal post inside the box.

Mount Sub-Frame: Neatly fold the wires back into the junction box, align the mounting sub-frame with the box screw holes, and tighten the retaining screws evenly.

Attach Glass Panel: Press-fit or snap the white tempered glass faceplate securely onto the mounting sub-frame.

Test Operation: Restore power at the main breaker board, plug in a device, and operate each toggle lever to verify independent power control.

Maintenance

Routine Cleaning: Wipe the glass faceplate with a soft, dry or slightly damp microfiber cloth. A small amount of isopropyl alcohol or glass cleaner applied to the cloth can be used for fingerprints and smudges.

Prevent Liquid Ingress: Never spray cleaning solutions directly onto the faceplate to prevent moisture from entering the socket apertures or switch levers.

Avoid Abrasives: Do not use abrasive scouring pads, steel wool, or strong chemical solvents, as they can scratch the glass plate or tarnish the chrome lever finish