Double 90 Degree Angle USB 2.0 Type-A Male To Micro-B Male Flat FPV Power Video Data Cable Micro USB 2.0 Aerial Photography Cord

Fold 90 Degree USB 2.0 Micro-B Male To Type A male FPV Flat Ribbon Cable Extension Data Aerial Photography Cord for GPS Navigator, ROCK Pi 4 Raspberry Pi SLR Handheld Pan/tilt

Brand name: ADT-LINK

Product name: USB 2.0 Type-A male to Micro-B male flat cable

Product model: USW2-MM-13P series

Transfer speed: support of increased up to 480M/bps

Wire length: 3~300 cm, the length can be customized,

Current capacity: 3A within 50cm ; 1.5A within 1 meter

Product application: GPS navigator, hard disk, ROCK Pi 4 Raspberry Pi MCU development board, built-in USB device to extend the use of adapter, convenient for brushle pan/tilt, USB power supply and camera video transmiion of handheld pan/tilt, etc.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk ar testing and verifying that they are correct.

Purchase restriction: This product is designed to connect to built-in USB devices. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Product Model description:

Product Name

Product Model

USB speed

A-type straight male (master) To Micro B-type straight male (slave) cable

US1A-UW1

USB 2.0

A-type straight male (master) To Micro B-type Down-Bend male (slave) cable

US1A-UW3

USB 2.0

A-type straight male (master) To Micro B-type Up-Bend male (slave) cable

US1A-UW3R

USB 2.0

A-type Up-Bend male (master) To Micro B-type straight male (slave) cable

US2A-UW1

USB 2.0

A-type Up-Bend male (master) To Micro B-type Down-Bend male (slave) cable

US2A-UW3

USB 2.0

A-type Up-Bend male (master) To Micro B-type Up-Bend male (slave) cable

US2A-UW3R

USB 2.0

A-type Left-Bend male (master) To Micro B-type straight male (slave) cable

US2L-UW1

USB 2.0

A-type Left-Bend male (master) To Micro B-type Down-Bend male (slave) cable

US2L-UW3

USB 2.0

A-type Left-Bend male (master) To Micro B-type Up-Bend male (slave) cable

US2L-UW3R

USB 2.0

A-type Down-Bend male (master) To Micro B-type straight male (slave) cable

US3A-UW1

USB 2.0

A-type Down-Bend male (master) To Micro B-type Down-Bend male (slave) cable

US3A-UW3

USB 2.0

A-type Down-Bend male (master) To Micro B-type Up-Bend male (slave) cable

US3A-UW3R

USB 2.0

A-type Down-Bend male (master) To Micro B-type straight male (slave) cable 02

US3R-UW1

USB 2.0

A-type Down-Bend male (master) To Micro B-type Down-Bend male (slave) cable 02

US3R-UW3

USB 2.0

A-type Down-Bend male (master) To Micro B-type Up-Bend male (slave) cable 02

US3R-UW3R

USB 2.0

Note 2:(Master) means connecting to the host port; (slave) means connecting to devices such as U Disk, Card Reader, Hard Disk Case,etc

Product Image: Product real shot:

Summary of technical iues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shielding for Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.