Diy Assemble Toys Dynamo Generator Model Wood Invention Scie

Detailed Information About The Product:

Gender: Boys
Warning: DIY Science Toys
Scientific experiment toys exercise children's practical ability.DIY small toys cultivate innovative ability.Put education in fun, cultivate scientific knowledge;
Age of application: over 3 years old
Type of toy: intellectual development
Principle:
The closed coil rotates in the magnetic field,and the inductive current is generated by electromagnetic induction,so the principle of its generation is battery induction.
Methods of assembly:
Step 1:stick four small squares to the four corners of the board with white glue.
Step 2:glue the frame with white glue.The glue is not dry at this time.so we need to take it lightly and put it lightly.
Step 3:connect the whole frame with glue.Wait for 15-20 minutes until glue to solidify.
Step 4:after glue solidification, assemble the drive shaft with yellow sleeve clamp,small white rotating axis toward the inside.
Step 5:install swing arm and drive wheel,and use yellow sleeve clamp.
Step 6:tie the motor bracket under the skew beam with the strapping band,or put it flat on the board. Install the motor.
Step 7:install a belt, a short belt for the top wheel,a long belt to connect the motor wheel and the top;
Step 8:use double-sided adhesive to fix USB plate, red wire to positive pole,black wire to negative electrode, complete assembly. Because the circuit needs a steady current to start off,speed up a few laps (or pick up a belt bomb several times) until the lights turn on to slow down the speed.
colour:Photo Color
Material:Wood,electronic components, plastic
Product size:9.5x6x11cm/3.74x4.33x2.36inch
Package Contents:
1 * DIY Generator Model
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.