Digital multimeter voltage tester 2000 count 600 volts AC/DC voltmeter NCV phase sequence automatic distance measurement muti-ter

Characteristics
NCV Test: In the NCV mode, gradually bring the NCV sensor probe of the instrument closer to the area to be tested. When the instrument detects a weak electric field signal, the green backlight lights up and the screen displays "--L". When the instrument detects a strong electric field signal, the red backlight lights up and emits rapid beeping sounds, while the screen displays "--H".

Real-time Detection: When selecting the real-time mode, connect the red probe to the test point or insert it. When the instrument detects a weak signal, the green backlight will light up and the screen will display "--L". When the instrument detects a strong signal, the red backlight will light up and emit a rapid beeping sound. The screen will display "--H".

Resistance measurement: It can measure the impedance of various resistive components and cables.

Continuous test: For resistance measurements less than 500Ω, the instrument will emit a beep sound and the backlight will turn green. 
LED flashlight illumination: The LED flashlight can be used to carefully inspect the contact points, facilitating the measurement by the probe. 
Automatic power-off: If there is no operation within 15 minutes, the instrument will automatically shut off the power supply to save battery capacity.

Standardization
Brand: HABOTEST 
Model: HT93 
Product Name

Color: Black

Material: ABS

Direct current voltage: 2V/20V/200V/600V, ±(0.5% + 3) 
Operating voltage: 2V/20V/200V/600V, ±(1.0% + 3) 
Resistance: 2000Ω / 20kΩ / 200kΩ / 2MΩ / 20MΩ, ±(1.0% + 3) 
Quantity: 200 
Monitor: HTN 
Automatic/Manual range: Automatic 
On-site test: Yes 
NCV: Yes 
Phase test: Yes 
Continuity: Yes 
Data retention: Yes 
Actual effective value: Yes 
Bandwidth: 40 to 1kHz 
Low battery indicator: Yes 
Automatic shutdown: Yes 
Backlight: Yes 
Work lamp: Yes 
Power Supply: 2 AAA batteries of 1.5V each (not included) 
Safety level: EN61010-2-030, EN61010-2-033, CAT III 600V 
Pollution level: 2 
Altitude: < 2000m 
Operating temperature and humidity: 0°C to 40°C (humidity < 18%, no condensation at < 10°C) 
Storage temperature and humidity: -10°C to 60°C (less than 70% RH, remove the battery) 
Temperature coefficient: 0.1% / °C (for temperatures below 18°C or above 28°C) 
The maximum allowable voltage between the measuring terminal and the ground: 600V 
Over-range indication: Displays "OL" 
Input polarity indication: Automatically displays the "-" sign 
Product dimensions: 136.2 * 44.5 * 32 millimeters / 5.36 * 1.75 * 1.26 inches 
Product weight: 97 grams / 3.42 ounces 
Packaging weight: 166 grams / 5.85 ounces 
Package dimensions: 17.6 * 8.5 * 5.7 centimeters / 6.93 * 3.34 * 2.24 inches

Packaging List
1. Smart Multeter 
2 * Test leads 
1 * User Manual (English)