Dial Shore Hardness Tester Durometer 0-100HC LCD Shore

Product introduction

Dial Shore Durometer Sclerometer Rubber Hardne Tester Major performances Shore rubber hardne gauge is an apparatus to measure vulcanized rubber and plastic products. This apparatus has three models of Type A, Type C and Type D. Type A and D respectively are applicable to the testing of low and medium hardne, and high-hardne materials. Type C applies to the testing of microporous material which is used to make shoes, with compreion rate 50 percent, stre 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic. This hardne gauge conforms to the regulations of GB/T531-99, GB2411-80, hg/t2489-93, JJG304-2003. Charactor LXD-A digital hardne tester is widely applied in the low and medium hardne plastic ,all kinds of rubber , multidimensional ,leather,wax hardne texst ect. The product refers to ISO868 and the ISO7619 international standard production,conforms to GB/T531,JB6148 and the JJG304 standard. Technical Graduation0-100 degree Indentor running0-2.5mm Indentor pre on telosA,C type 0.55N-8.06N,D type O-44.5N About Package Package weight 0.35 kg Package Contents 1 x Shore Durometer 1 x Instruction Manual 1 x plastic box

Digital Shore Durometer Series Shore rubber durometer is a type of vulcanized rubber and plastic product.

Three measuring heads can measure different materials

Indentor Shape:Type A

Measuring head :flat cone point (0.79 mm),35° Included Angle

Range:0-100HA

Resolution:0.5HA

Indentor pre on telos:0.55N-8.06N

Type A and D respectively are applicable to the testing of low and medium hardne, and high-hardne materials.

Indentor Shape:Type C

Measuring head :2.5 mm Spherical.

Range:0-100HC

Resolution:0.5HC

Indentor pre on telos:0.55N-8.06N

It's suited for measuring Foam,Sponge, Shoes with incorporates material, etc.

Indentor Shape:Type D

Measuring head :Sharp cone point (SR0.1 mm),30° Included Angle

Range:0-100HD

Resolution:0.5HD

Indentor pre on telos:O-44.5N

It's suited for measuring Hard Rubber and Plastics such as Thermo Plastics,Flooring and Bowling balls,hard rubber, hard resin, acrylic, gla, cushiony plastic cement,  printing plates, fiber, etc.

Product Details The dial is clear, convenient for reading. The metal body, with good wear resistance and anti-corrosion properties. Functions 1. Measuring head 2.Lock key 3.Dial 4.Measuring tip Product Size(Unite:mm) How to use 1.Make zero before measure it.when durometer pre on the gla,the hand should be on the position of 100 degree. 2.Put the sample on the stable plane,carry the durometer,the indentor keep 12mm away from the edge,pre the sample reposefully,make the indentor pre it vertically,then read it untill the durometer end and the sample contact completely. 3.Measure the hardne at least 5 times in different place away at least 6mm from the sight,averaging(micropore material sight at least keep 15mm). Package:Plastic case The measured show Tpye A:Suitable for medium Hardne Plastic, Rubber,Leather,Polyester,Wax etc. Type C:It's suited for measuring Foam,Sponge, Shoes with incorporates material, etc. Type D:Its suited for measuring Hard Rubber and Plastics such as Thermo Plastics,Flooring and Bowling balls,hard rubber, hard resin, acrylic, gla, cushiony plastic cement,  printing plates, fiber, etc.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.