DC12V 10A Relay 1 CH Wireless RF Remote Control Switch Transmitter With Receiver Module 433mhz LED Remote Control-Transmitter Receiver

Input Voltage: 12 V, RF working mode: Superheterodyne

• Receiver sensitivity: > 97 dbm

• Transmitting distance:> 100 m ( open space)

• De mode: MCU software de

• Remote storage: 20

• Support remote type: EV1527 learning code

• Working mode: Momentary, tole, latching time delay (5s ,10s ,15s )

• Output terminal: NO , NC , COM

• Remote control battery: 2 x 3 V CR2016 on batterie

Note: Maximum input power is 12 V

Remote programming

Working mode:

1. Inching mode: pre the remote control the relay will connect , and then release the remote controlto disconnect the relay;

2. Self-locking mode: pre the remote control the relay will connect , and then pre the remote control again to disconnect the relay;

3. Interlock mode: pre the remote control key A to connect the relay, and pre the remote control key B to disconnect relay .

4. Delay mode: pre the remote control the relay will connect , release the remote control and start timing. Ar 5 S , 10 S and 15 S (3 gear s ), the relay will be automatically closed.

Learning Methods:

1. Inching learning method:

Pre the code pairing on on the control panel once, and the LED indicator will flash once. Ar the LED indicatorlit, pre the on you need to pairing on the remote control , the LED indicator on the control panel will flash for 3 times which means the pairing succeed .

2. Self-locking learning method:

Pre the code pairing on on the control panel twice , and the LED indicator will flash twice . Ar the LED indicatorlit, pre the on you need to pairing on the remote control , the LED indicator on the control panel will flash for 3 times which means the pairing succeed .

3. Mutual lock learning method:

Pre the code pairing on on the control panel three times , and the LED indicator will flash three times . Ar the LED indicatorlit, pre the on you need to pairing on the remote control , the LED indicator on the control panel will flash for 3 times which means the pairing succeed .

4. 5S delay learning method:

Pre the code pairing on on the control panel four times , and the LED indicator will flash four times . Ar the LED indicatorlit, pre the on you need to pairing on the remote control , the LED indicator on the control panel will flash for 3 times which means the pairing succeed .

5. 10 S delay learning method:

Pre the code pairing on on the control panel f ive times , and the LED indicator will flash five times . Ar the LED indicatorlit, pre the on you need to pairing on the remote control , the LED indicator on the control panel will flash for 3 times which means the pairing succeed .

6. 15 S delay learning method:

Pre the code pairing on on the control panel six times , and the LED indicator will flash six times . Ar the LED indicatorlit, pre the on you need to pairing on the remote control , the LED indicator on the control panel will flash for 3 times which means the pairing succeed .

Clear ingmethod :

Pre the code pairing on on the control panel eight times , then it will automatically clear all the learned remote controls.Ar clearing, the remote control previously learned can no longer be used .

Package including

1*Receiver module

1*Remote Control (with battery)

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.