DC 12V Car Side Mirror Heating Pad 1minute QuiHeating Remove Fog/Rain/Frost Vehicle Rearview Mirror Heating Keep Safe Drive

If you need an automatic timer switch module, you can purchase it at this link

https://www..com/item/1005007932008302.html

DC 12V Car Side Mirror Heating Element/Pad

Package Includes:

XXX A pair=Left+Right heating pad

Wire KIT=only Wire+Switch+Fuse no heating pad

Description

S01 Upgraded to S01 Pro
Voltage: DC 12 V
：10-12Ω
Power: About 28W in total
Heating pad size: 17CM x 12CM
MInimum cut size:15X10CM
Heating Temperature 35-65℃
Heating material:Aluminum Foil Alloy

Other model sizes：Show in picture
Other model ：8-15Ω

Before you order. Please chethe size is suitable for you

If there is no model corresponding to your car, please take a photo of the mirror and the size.

Choose the most suitable one from the dozens of models we provide.

How to install heating pad

1: Carefully remove the side mirror from the car

2: Use a heating tool or hairdryer to heat the area around and on the baof the gl,
e it easier to separate the from the Mirror holder.

3: Peel off the adhesive paper on the baof the heating pad and stithe heating pad to the baof the gl.

4: If the gl and the mirror holder were ly d to each other.
The gl need to be reattached using double sided tape or other adhesive tools on the mirror holder.

5: If the frame is wrapped with a frame, just put the gl backthe holders can be heated first

6.If the metal terminal is not in the empty position of the mirror holder, you can open the hole manually.

How to connect the circuit?

1: Wired in parallel to the rear window heating switch
or install a separate switch take ACC power from the fuse box

2: The circuit schematic is shown below

Due to the large number of models, we do not provide physical manuals. Please refer to the introduction of this link