Chloride UK Standalone Smoke Alarm (9v)

The Chloride UK CSD-218 series Standalone smoke alarm runs on a 9V battery. 

Chloride Uk smoke alarm is useful in residential homes, hall and commercial offices. It operate on the principle that electrical current flowing between electrodes in an ionization chamber is reduced when smoke particles enter.

Chloride Uk smoke alarm gives a rapid response to fast flaming fires.

The Chloride Uk smoke alarm is easily installed and comes supplied with all necessary screw fixings.

It is fitted with a warning flag that pops up when the battery is removed. This prevents the cover from closing when there is no battery fitted to the unit. When the battery is being installed or changed, this flag must be held down while gently pushing the battery into the battery holder.

When the battery is first connected, the alarm may sound for 2-3 seconds – this is normal and means that the battery is connected correctly.

Operation

• The smoke detector will activate the built in sounder upon sensing smoke particles
•  The smoke detector will automatically reset itself and silence the sounder when smoke particles are no longer present in the sensing chamber
• The built in sounder will provide a minimum sound output of 85dB at 3m
• The smoke detector has a built in warning flag to prevent installation of the detector without a battery fitted
• The “Test” button will perform a self test and sound the horn (it may take up to 10 seconds)
• The smoke detector will emit a beep every 40 seconds to indicate that the battery back up is depleted and needs replacing.