Car Rear View Camera Trunk Handle Reverse Monitoring Fit Fo

Feature:
1. The camera is made of high‑definition chipset, with clear and colorful image display.
2. IP68 level waterproof, it can also show excellent functions even in heavy rain days.
3. 170‑degree wide viewing angle, provides wider and clearer vision, making it safer to reverse.
4. With automatic backlight compensation, the night vision is clear and bright, and supports NTSC TV system.
5. Solving the problem of car poor rear view effect, can help parking and reduce accidents.
6. Easy to install, no complicated tools required, convenient to use.

Specification:
Condition: 100% Brand New
Item Type: Rear View Camera
Material: ABS + Glass
Color: As-picture shown
Image Sensor: Color 1/3in Sensor CCD
Lens Material: 100% Glass
Effective Pixels: 756(H)×720(V) Pixel
Horizontal Resolution: 480TV Lines
Auto White Balance
Automatic Backlight Compensation
Field of View: 170 Degrees
Night Vision: Support
Tv System: NTSC
Video Output: CVBS RCA Connector (1.0VP-P, 70OHM)
Minimum Illumination: 0.01 Lux / F = 1.2 (0 Lux and IR)
Voltage: DC12V
Power Consumption: 120mA
Working Temperature: -20°C-75°C, Relative Humidity Maximum 95%
Storage Temperature: -40°C-80°C, Relative Humidity Maximum 95%
Waterproof Rating: IP68
Video Cable Length: Approx. 6m/19.7ft
Power Cord Length: Approx. 1.5m/4.9ft
Fitment: Fit for Cadillac ATS 2013-2018
Mounting:
1. Take out your stock license plate light at the back of your car.
2. Fix the camera to where the stock license plate light was.
3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
4. Connect the power of the camera to your car reverse lights - red wire to positive and black wire to negative.
5. Connect the video cable of the camera to the extension cord.
6. Connect the extension cord to your car monitor.
7. You will see the images when your car is in reverse shift..

Package List:
1 x Rear View Camera1 x Power Cord1 x Video Cable1 x Manual