Car Door Lights LED Welcome Flash lamp Magnetic Control USB Charging Auto Open Door Anti-collision Emergency Signal Lamp

Car Door Lights LED WelcomeLight Magnetic Control USB Charging Auto Open Door Safe Anti-collision Emergency Signal Lamp

 
It doesn't light up in the day, it lights up automatically in the dark

Description:

Product name: Magnetic control door lighting

Battery life: 500 times rechargeable

Input voltage: 5V

Charging time: It is recommended to charge once every 2-3 weeks

Battery capacity: 120mA

Number of lamp beads: highlight LED lamp beads

Charging time: 40min

 

Specifications:

1.Magnetic induction door lights up when the door is opened, 6 high-brightness LEDs, magnetron lighting;

2.Induction switch design, open the door and the door is on/off when the door is closed, the door is automatically turned on, and the ground is irradiated with a clear view to avoid stepping on splashing puddles or gravel and causing feet;

3.Door lighting lights, illuminate the ground and open the door at night, and temporarily stop and open the door, illuminate the ground to warn the rear vehicles/pedestrians on the road to improve driving safety;

4.6 LED high-definition lamp beads, built-in high-brightness lamp bead protective cover integrated design, stable performance and not easy to fall off;

5.Mini and compact, does not affect the opening and closing of the door, fits the four-part original car structure design, free opening and closing of the door, suitable for most models;

6.Multi-scene installation, co-pilot, storage box, can be installed in the central control armrest box, co-pilot storage box, home cabinet, etc;

7.Without fear of rain, the casing is tightly designed to prevent rainwater from penetrating into the interior, which effectively protects the inner control panel and prolongs the service life of the lamp;

8.USB charging for long-lasting battery life, built-in large-capacity battery has long standby time and durability.

9.Stick and use non-destructive installation, convenient installation design.

 

Installation Method:

1. Wipe the bottom of the door with a towel or paper towel

2. Tear off the light/magnet adhesive

3. Paste on the corresponding positions respectively (Note: The magnet needs to be accurately corresponding to the middle induction rod)

4. After the paste is completed, the door opens and the door turns off.