Car BSD Blind Spot System 77Ghz Millimeter Wave Horizontal 164ft Vertical 14.43ft Changee ed Parking

Car BSD Blind Spot System 77Ghz Millimeter Wave Horizontal 164ft Vertical 14.43ft Changee ed Parking

Product Introduction:

This system product can warn the dangerous targets in the adjacentes. The unique ability of 77Ghz millimeter to penete , fog and dust can realize all-weather and all-time application, detect the objects in the signal area in real time, and calculate the speed, angle and relative dispment of 64 objects at the same time. It can detect the target within M(164ft) at the farthest, and finally output the alarm signal, which includes the first-level alarm and the second-level alarm.

1.Ar the ACC is powered on, the system can immediately enter the working state ar the envmental adaptation test. When the car is turned off, the stops working.

2.The system is in the first-level early warning state except when the turn signal lamp is turned on, double fing warning lamp and R re gear is ened.

3.When the turn signal is turned on, double fing warning lights and R re gear is ened, the system is in the second-level early warning state.

Level 1 alarm: the reminder light is always on.

Level 2 alarm: the warning light fes+the sounds.

The alarm range is centered on the rear of the car. The lateral distance is X and the longitudinal distance is Y. The left lateral distance of the center is negative, and the right lateral distance of the center is positive.

1.Product s-

Normal state of equment:

1) Ar the equment is powered on, the left and right indicator lights f 3 times respectively.

2) When the car speed exceeds 15km/h and there is a target car in the blind area, the indicator light is on, and the steering sounds and the indicator light fes.

Equment abnormal situation:

1) Ar the equment is powered on, the left and right lights f once, the control box is normal, and the is abnormal.

2) Ar the equment is powered on, the indicator light always goes off, and the of the control box does not work normally. Please check whether the power-on signal intervenes normally.

2. Blind area ing function -BSD:

System starting speed: V≥15Km/h.

Horizontal range of early warning:

1.5m≤X≤4.4m(4.92ft≤X≤14.43ft),-4.4m≤X≤-1.6m(-14.43ft≤X≤-5.25ft).

Longitudinal range of early warning: 0 m≤Y≤6.5m(0ft≤Y≤21.32ft).

Early warning stegy: alarm for moving targets in the alarm area.

Including active overtaking or paive overtaking, the relative overtaking speed is not more than 20km/h.

3.BSD early warning mode:

A.When the moving object enters the blind area ing area (the car does not turn on the turn signal), it wilive a first-cla warning until the target object leaves the ing area and cancel the warning.

B.When the moving object enters the blind area ing area (the vehicle turns on the turn signal), a second-level warning will be generated until the target object leaves the ing area, and the warning will be cancelled.

3. Parallel auxiliary approach early warning function -LCA:

System starting speed: V≥15Km/h.

4.Horizontal range of early warning:

1.5m≤X≤4.4m(4.92ft≤X≤14.43ft),-4.4m≤X≤-1.6m(-14.43ft≤X≤-5.25ft).

Longitudinal range of early warning: 0m < Y≤ m(0ft≤Y≤164ft).

Early warning stegy: approach time ≤ 4.0s.

5.LCA vehicle approach early warning mode:

A. When the target enters the alarm range (the car does not turn on the turn signal), a first-cla warning is generated, until the target leaves the alarm area, cancel the warning.

B. When the target enters the alarm range (the car turns on the turn signal), a second-level warning will be generated until the target leaves the alarm area, and the warning will be cancelled.

6. Rear collision warning function -RCW:

System starting speed: V>2Km/h.

Horizontal range of early warning:-1.6m ≤ x ≤ 1.6m(-5.25ft≤X≤5.25ft).

Longitudinal range of early warning: 10m < y ≤ m(32.8ft≤X≤164ft).

Early warning stegy: approach time ≤ 1.5s.

In thee directly behind the car, there is a car approaching quickly and there is a warning meage, and the left and right LED lights f.

Specifications:

1.Operating voltage: 9 V- 32 V

2.Operating frequency band:77 -79Ghz

3.Working temperature:- 25℃ ～ +75℃(-13 ℉～167℉)

4.Power consumption:< 3 W

5.Waterproof grade: 67

6.Distance resolution: 0.2M (0.656ft)

7.Ranging accuracy: is better than 0.1M(0.328ft)

8. range:0- m(0-164ft)

9.Horizontal angle range:1°

10.Pitch angle range: ±10°

11.Velocity measurement accuracy: 0.1m(0.328ft)/s

Packing List:

2*Reminder light extension cable (4m)

1*Power cord (1m)

1*In-car

2*In-car warning light

1*Power extension cord (5m)

1*77Ghz millimeter wave

1 Set* Mounting Brackt Acceories

1*r manual

1.Connection method of power cord(For more installation methods, please see the manual):

A. Connect the black line of the power cord to the negative pole of the car or ground it.

B. Connect the red line of the power cord to the ACC power supply of the car (the car starts normally/turns off without electricity).

C. Correspond the extension line of the reminder lamp and the reminder lamp according to the left and right labels, and connect the male and female connectors.

2. Connection method of power extension cord:

Route the power extension cord from the front of the car to the rear of the car. Plug the front of the car into the power cord, and plug the rear of the car into the box line of the mainframe.

3. Main box wire link method:

A. The special plug of the host box is plued into the host box.

B. 6Pin hole end plug and power extension cord are plued oppositely.

C. 5 pin-end plug and cable are plued into each other.

D. The yellow line is connected to the positive pole of the left turn signal lamp.

E.The orange line is connected to the positive pole of the right turn signal lamp.

F.The line is connected to the positive pole of the lamp.