BMTxms Canbus H11 H8 LED Fog H10 H16 5202 PSX24W 2504 9006 HB4 9005 HB3 880 881 H27 LED Car DRL Driving Lamp White Yellow

This model is not suitable AUDI ,Mercedes-Benz,VW,BMW,Mini cooper,2013 Toyota Matrix, uch models need the buy a decoder




This F1 series product has lower brightness and decoding performance than the E2 series product. If you need a brighter product, you can purchase the E2 series product

This lamp only for fog light ,not for headlight

Description：

Lumens: 6000 lumens
Power: 25W/bulb 50W/pair
Operating Voltage : DC9-18V
IP Rate : IP67 WaterProof
Light Source Model : 1860 CSP
Color Temperature : 6000K White / 3000K Golden Yellow
Heat Dissipation: Theory Aviation aluminum 6063
Operating Life: >30,000hrs
Operating Temperature: -40°C~+80°C
Compared with halogen bulbs: Brighter 350%+
Application: Replace Fog Lights/DRL Driving Lamp

Features：

1.CANBUS No Error Design
● Built in high quality constant IC can keep the current and voltage stable,Anti- interference circuit design Apply to most of car models
● Simple installation, no warning on PC board, means error warning free or ok for canbus for 99% cars

2.Unique Reflective design
● 45°Reflective Surface Design
● Unique reflective design, Full use of original car reflector Original car lighting shape High efficient lighting

3.Good Heat dissipation
● Made by high quality aluminum alloy housing can, Aluminum alloy shell acts as radiant heat sink, ensure the secure temperature range.

4. Installation (1:1 ) size design
● 10 Mminutes Quick Installation
● No Installation Space Restrictions

Note:

1, Please check Socket of your old lamp before purchasing.
2, European, American and newest vehicle equipped with CAN-BUS system may require load resistors to bypass the error codes/flicker issue. The load resistor need to be extra ordered.

Installation instructions:

▶ 1. Please turn off the car power before installation and then turn on the car power after installation
▶ 2. If there is a situation of non decoding after installation (such as frequent flashing, instrument panel not decoding, not lighting up, etc.), please try adjusting the positive and negative poles or swapping the positions of the left and right LED lights, because some products have polarity. If the positive and negative poles are not installed correctly, non decoding may occur