Black Net Sleeved 12 Inch IDE Molex To 3 X TX4 4-pins PWM CPU Case Cooling Fan Splitter Hub Power Adapter Cable W/ RPM Feedback

Features Power from PSU Molex 4-pin LP4,supporting threePWM fans from a single motherboard header Since only one RPM signal can be read by one motherboard connector, only one 4 TIPS CONNECTOR of the fansplitter cable carries an RPM signal; thus the motherboard will only read the RPM signal of the PWM device that is connected to full 4-pin connector. The other two male connectors are miing the pins of tachometric signal,ensure your fan speed monitor won't bounce all over the place from getting three sense signals.Guarantee motherboard getting an accurate RPM signal. Only one of the three fans sends its tach signal (the one with full 4-pin connector) reports its RPM, but the others will still follow the PWM signal. TX4 4-pin female connect to motherboard for RPM feedback,allowing all fan speed to be synchronized with CPU load Compatible with 4pin PMW fan connector and 3pin fan connector ( Due 3pins no PWM controller, 3pinfans would run in full speed.) Power from PSU 12V DC only,do not utilize for 5V DC fan Sleeved in a black is enhanced cable management,enclosure to provide a sleeker look that seamlely integrates into the case's interior Specifications Color :black sleeved cable Wire Gauge: 26AWG Tinned Copper - UL1007 Wire Cable Length: 12 inch Connector A: 1 - 5.25" Molex 4 pin LP4 Male Connector B: 1 - TX4 4-pin Female for RPM feedback -Connect to motherboard 1- TX4 4-pin Male 2 - TX4 4-pin Male (3 wires only,miing the pin of tach) Voltage:12V DC Note: Only the fan on 'CPU Fan' channelis used for monitoring. All connected fans arefollowingthe samePWM signa,speed control is the same for all fans when usefan controller software likeAI stuite/Xspert FAN andEASY TUNE,etc PWM capable connectors must necearily be 4-pin, but not all 4-pin motherboard connectors implement or enable the PWM signal modulation by default. Please carefully consult your motherboard doentation in this respect. This is only a fan splitter cable,NOT fan speed controller,

Only 4pin PWM fans speed can be adjusted by fan controller software,

3pin fan would run in full speed,can not be adjusted when connect.

About shipping
Shipping and Packaging All items will be double checked and well packed before sending.Items will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.