Automotive Injector Tester 4 Modes Powerful Fuel System Sca

₦ 27,767

₦ 54,42649%

3 units left

+ shipping from ₦ 5,809 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 5,809

Ready for pickup between 26 May and 28 May if you place your order within the next 14hrs 19mins

Door Delivery

Delivery Fees ₦ 6,569

Ready for delivery between 26 May and 28 May if you place your order within the next 14hrs 19mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

Sophiai

88%Seller Score

4 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Good

Product details

Detailed Information About The Product:

Operation Instruction:
1.Turn off the vehicle's engine.
2.Connect the black clip to the negative terminal of the vehicle battery, connect the red clip to the positive terminal of the battery.
3.Locate the fuel injector which you want to test, then remove the electrical cable from this injector and connect the tester's two pulse output terminals to the electrical connector of this injector.
4.Press the MODE SET key to select the desired pulse mode, the display shows the current pulse mode.

Injector Tester Specification:
Power Supply:12V vehicle battery
Operation Environment:0-40°C,relative humidity Less than 80%
Storage Environment:-10°C ~50°C, relative humidity Less than 85%
Test Cable Length: 41.5cm/ 16.3 inches
Product Size:147x82x29mm
Explanations for the 4 Modes:
Mode1: the tester will output 1 pulse, whose pulse width is about 250ms.
Mode 2: the tester will output 50 pulses, every pulse's pulse width is about 7ms.
Mode 3: the tester will output 100 pulses, every pulse's pulse width is about 3.5ms.
Mode 4: the tester will output continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms.
At any time, you can press the PULSE key again to stop outputting pluse.
5. After you have selected the desired pulse mode, press the PULSE key.
The tester outputs pulse(s) to the injector under test, the pulse signal indicator will light as indication.
Material:ABS
colour:black

Package Contents:
1 * Injector Tester

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.