ADT USB 3.0 Type C Female To Internal Mainboard Type E Male 20Pin Ribbon FPC Flat Extension Cable With IC ITX ATX A4 PC Extender

5Gbps USB 3.0 Type-C Female Socket To Internal 19Pin Type-E Male Flat Extension Cable With PCI baffle For ITX/ATX motherboard A4 Case

Brand name: ADT-LINK

Product name: USB 3.0 Type-C female to Int.19Pmaleflat cable

Product model: UTF3.0-FM-20P series

Transfer speed: USB3.0Standard 5Gbps

Wire length: 3~300 cm, the length can be customized,

Current capacity: 3A within 50cm ; 1.5A within 1 meter Product application: ITX/ATX motherboard built-in internal 20Pin USB connector or type-e connector, suitable for A4-ITX chais customized side panel USB type-C port. ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Product Model description:

Product Name

Product Model

speed

Type-C straight female to Int. 19Pstraight male extension cable

UT7B-UF1A

USB 3.05Gbps

Type-C Up angle female to Int. 19Pstraight male extension cable with screw holes

UT8T-UF1A

USB 3.05Gbps

Type-C Up angle female to Int. 19Pstraight male extension cable with screw holes, PCI baffle UT8T-UF1A-BK USB 3.05Gbps

T8Q: with /IC/E-marker Product image: Product real shot: Summary of technical iues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shieldingfor Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender. What is the hole pitch size of the UT8T? The center hole distance is 19mm, and the hole distance range is from 16.5~21.5cm Model UT8T/UT8Q difference? Model UT8T has no , and the signal attenuation ar the two USB cables are connected in series may not meet the requirements of USB high-speed signal transmiion. Model UT8Q with using Diodes/Pericom's Redriver Repeater IC, which regenerates the signal and enhances its signal quality. To reduce the incidence of signal transmiion errors, refer to the following schematic:

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.