Adjustable Gimbal Recessed COB LED Downlight Spotlight (White Trim)

High-Voltage Safety Warning

Always switch off power at the main electrical breaker box before installing, inspecting, or servicing wired light fixtures.

Product Name

Adjustable Gimbal Recessed COB LED Downlight Spotlight (White Trim)

Product Description

Upgrade indoor ceiling lighting with this versatile adjustable recessed COB LED spotlight. Built with an ultra-clean white trim ring and an inner tilting gimbal housing, this fixture allows you to rotate and angle the beam precisely where light is needed. It features a deep-set diamond-pattern faceted reflector to deliver bright directional lighting while preventing harsh glare. Equipped with two heavy-duty spring-loaded retaining clips with protective orange sleeves, it ensures a snug, tool-free flush mount in false ceilings, drywall, and gypsum panels.

Feature Highlights

Adjustable Gimbal Head: Inner ring tilts smoothly to direct light toward specific walls, artwork, or focal areas.

COB LED Core: High-efficiency Chip-on-Board light source delivering vivid, uniform illumination with minimal energy draw.

Anti-Glare Faceted Reflector: Deep-set diamond reflector optimizes beam focus while protecting eyes from direct glare.

Sleek White Bezel: Premium matte white powder-coated housing integrates seamlessly with standard white ceiling finishes.

Heavy-Duty Retention Clips: Durable spring clips with silicone sleeves hold the downlight firmly in place without damaging gypsum surfaces.

1.Power Off:Safety Prerequisite.

Shut off the main electrical power supply at the circuit breaker box before handling any wires.

2.Prepare Ceiling Hole:Measurement.

Cut a circular opening in the ceiling board corresponding to the specified cutout diameter of the downlight.

3.Wire the Driver:Electrical Connection.

Connect the input wires of the external LED driver to your mains AC supply (Live to Live, Neutral to Neutral, Ground to Ground) using insulated wire connectors.

4.Insert into Ceiling:Physical Installation.

Fold the two spring-loaded retaining clips upward, push the spotlight fixture into the cutout hole, and gently release the clips to anchor it flush against the ceiling.

5.Restore Power & Test:Verification.

Switch the circuit breaker back on, turn on the light, and tilt the inner ring to set your desired beam angle.

Maintenance Guidelines

Routine Cleaning: Wipe the outer white rim periodically using a soft, dry microfiber cloth.

Reflector Care: Clean the front lens and faceted reflector cup gently with a dry, lint-free cloth.

Avoid Harsh Chemicals: Do not use abrasive pads, solvents, or liquid sprays directly on the powder-coated finish.