Adapter 40 Pin IDE To Connector 3.5 HDD IDE/PATA Hard Disk Adapter Converter With 7Pin- Data Cable

OULLX IDE Adapter 40 Pin IDE to Connector 3.5 HDD IDE/PATA Hard Disk Adapter Converter With 7Pin- Data Cable

Notice:

This adapter is used for desktop computer PC, not for laptop USB port.

Because the voltage of USB port of laptop is not enough to operate the adapter

Please try to connect the adapter with port of desktop computer PC motherboard

Features:

100% and high quality!The Adapter turns your 40pin HDD to connector. Fit for 40-pin IDE device, such as 3.5IDE,CD-ROM,CD-RW etc.Compliant with Serial ATA specificationFully plug and play,no drive needed.Doesn\'t support hot swap.Compatible with all brands of desktops:1, the video IDE hard drive to , connected to the motherboard port.2, 3.5-inch IDE hard drive to , connect to the motherboard port3, IDE drive to , connect to the motherboard port4, IDE er to , connect to the motherboard port5, you can nsfer the desktop 3.5-inch IDE hard drive to the please format the hard disk on the computer first.6, the nsferred hard disk can be the main disk, the disk requires reinstall the system, refresh in the BIOSS, etc..7, the nsferred optical drive can guide the system.8. The IDE device using the riser card must be inserted in the MASTER position.9, compatible with 1 generation, 2 generation, 3 generation10, plug and play, no need for any driverNote：If the product does not recognize the HDD or DVD/CD optical drive.The IDE device must set the jumper cap to theMA Masterposition. When it cannot be recognized: right-clion "My Computer - Properties" - "Hardware" - "Device Manager". Then open "IDE ATA/PATA Controller" and double-clion the primary and secry IDE s respectively, select "Advanced Settings", set "Device Type" to "Automatic ", and set "nsfer Mode" to "DMA if available" - Confirm. After restarting, cheif the system has discovered new hardware.