80cm 3D Wall Clocks DIY Mirror Stickers Large Wall Clock - Gold

The wall clock is 3D effect

Easy to install and remove the sticker

Alloy clock face,aluminum clock pointer and EVA foam stickers;

The clock finishing size is depends on your preference to decorate your wall, DIY distance from different digits, and DIY shape of the digits

1. For the production of stickers, non-toxic, do not fade, the service life of about 3-5 years.

2. The sticker is removable and has glue on the back, which is easy to paste on the wall or any other clean and smooth surface; Such as doors, wardrobes, etc.;

3. Glue the mirror. Before attaching the adhesive to the wall, paste the mirror on the surface of the adhesive.

4. Put the seamless nail in the correct position, and the small tail should be upward. Remove the screw button from the clock dial, then place the scale and hang it on the traceless nail. The scale is best secured with tape.

5. Adjust the size of your wall. There are 12 black lines on the balance to indicate the correct position, move the ruler over each square and mark the position with a pencil, the black lines should be parallel for easier positioning.

6. Remove the UV film from the clock hand. Remove the screws from the clock dial and put in the hands,then the minute hand. Hang the clock on a nail without a mark.

7. Remove the paper from the mirror. Attach the mirror to each EVA sticker, then remove the UV film from mirror10. Put the EVA sticker on the spot you marked and follow this step to get you down.