8 Bit AC 220V Optocoupler Isolation Module For PLC Isolame

₦ 13,360

₦ 25,37647%

1 units left

+ shipping from ₦ 3,088 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 3,088

Ready for pickup between 21 May and 23 May if you place your order within the next 15hrs 11mins

Door Delivery

Delivery Fees ₦ 4,048

Ready for delivery between 21 May and 23 May if you place your order within the next 15hrs 11mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

Sophiai

88%Seller Score

4 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Average

Product details

Detailed Information About The Product:

Name：8 Bit AC 220V Optocoupler Isolation Module Voltage Detect Board Adaptive 3-5V for PLC Isolamento Fotoaccoppiatore Module
1 way 220V AC electro-optic coupler detection module. Function: It can be used to detect the existence of 220V ac. Output TTL level can be detected by SCM. It could be 3-5V. PLC24V level can also be connected.
When connected to the PLC input, the PLC COM end is connected to the power supply 24V input end is connected to the signal output OUT of the board, and GND on the optocoupler board is connected to the negative pole of the power supply.
Green 2P 5.0 terminal is connected to 220V voltage. The 3P terminal is connected to the SCM input. The board size is 73mm X15mm.
Safety warning: In practice, any device in the white wireframe on the plate should not be contact after the module is powered on. Because it is high voltage. Pay attention to the safety of electricity.

3-Way description:
Function: Test the existence of AC 220V; When there is 220V, the optocoupler can be grounded; Otherwise, it doesn't work
Output high/low level: SCM IO interface can be directly connected for testing with a voltage of 3-5V
Adaptable to PLC connection, compatible with almost all PLC input
8-Way description:
Function: Test the existence of AC 220V
Output TTL level: Can be tested using MCU, voltage is 3-5V
The output can be connected to PLC 24V
Connection:
When connecting PLC input, THE COM terminal of PLC is connected to the 24V power supply, the input terminal is connected to the signal output S1-S8 of the board, and the optocoupler GND is connected to the negative pole of the power supply.
Blue terminal 5.0 connects 220V voltage and yellow pin signal output.
When 220V voltage is normal, output low level; When 220V power off, output high level.
Note:
After the module is powered on, do not contact any part of the white line frame on the board, because it is high voltage. Pay attention to electrical safety.
Colour: green
Material: plastic

Package Contents:
1 * Optocoupler Isolation Module

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.