6Pcs for Chrer Dodge 3.6L 10200A 10202 10369A Camshaft Phaser Timing Chain Tool

10200A: Used as wedges to loosen the tension on the timing chains during Camshaft and phaser service procedures on 3.6L Engine. 10200-1 & 10200-3 are used on driver's side, 10200-2 is used on paenger's side.10202: Used to hold the Camshaft Phaser when performing the loosening and tightening of oil control valves during service procedures for Chrer, Dodge, 3.6 L Engine. 10202-1 is used on the right bank and 10202-2 is used on the left bank.10369A: Required to use on 2012 and newer models. Some 2011 models may also require 10369A, which depends on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A.Fitment Type: Direct RepmentWorks on 3.6L vehicles such as:For 2011-newer Dodge Caravan, Chrer Town & CountryFor 2011-newer Dodge JourneyFor 2011-2018 Dodge Ram 1500 DSFor 2011-newer Dodge Charger, Dodge Challenger, Chrer 300For 2011-2015 Grand Ckee and Dodge ngoFor 2012- 2017 For 2014-newer Dodge Ram PromasterFor 2014-newer CkeeFor 2011-2014 (Journey, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, ngo, Grand Ckee) - Syst (9 - Engine, 3.6L)For 2013 (Ram Tru1500, JF) - Syst (9 - Engine, 3.6L)For 2014 (Ram Tru1500, JF, KL) - Syst (9 - Engine, 3.0L oline, 9 - Engine, 3.2L, 9 - Engine, 3.6L)Colour: blackMaterial: ABSPackage Contents:6 x Timing Chain ToolNote:10200-1 & 10200-3 are used on Driver's Side, 10200-2 is used on Paenger's Side. 10202-1 is used on the Right Bank and 10202-2 is used on the Left Bank.Only the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.