Home Electronics Camera & Photo Video Drones, Quadcopters & Accessories Drone Accessories5V DC Micro Motor with Fan Blade

Share this product

5V DC Micro Motor with Fan Blade

₦ 5,000

Few units left

+ shipping from ₦ 950 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Variation available

none

Promotions

Call 07006000000 To Place Your Order Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Choose your location

Pickup Station

Delivery Fees ₦ 950

Ready for pickup between 27 February and 02 March if you place your order within the next 9hrs 7mins

Door Delivery

Delivery Fees ₦ 1,710

Ready for delivery between 27 February and 02 March if you place your order within the next 9hrs 7mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

LVK

80%Seller Score

151 Followers

Seller Performance

Shipping speed: Good

Quality Score: Good

Customer Rating: Average

Product details

These small 5V Micro Motor with Fan Blade are an inexpensive option for use in science projects or for general experimenting with DC motors. The soft fan blade allows the speed of the motor to be better observed and won’t hurt or cause damage if it hits something.

Features:

Motor Voltage: 3V DC - 6V DC (max)
Motor Current (no load) 60mA typical
Motor Current (stall conditions) 400mA typical
Motor Speed: 3V (No Load) 12000 RPM typical, 3V with Fan Blade attached 4300 RPM typical
Dimensions Motor:

(L x W x H) 27.5 x 20 x 15mm (1.08 x 0.8 x 0.6″)
Shaft (L x Dia) 8 x 2mm (0.32 x 0.079″)
Fan (Blade Dia x Hole size) 65 x 2mm (2.56 x 0.079″)
Lead Length 125mm (5″)

Evaluation Results:

These small ‘130 size’ DC motors are designed to work from 3 to 6V DC for typical battery use, but they will also work fine for periods of time on 5V such as if experimenting with PWM or DC voltage for motor speed control. Speed and current will vary with the voltage and load the motor is being operated at.
The fan blade is a simple press fit onto the shaft and allows the rotation of the motor shaft to be more easily observed which is handy when playing with speed control. The blades are made of a soft plastic to avoid damage to fingers or things if it is bumped while spinning.
The male jumper pins make these easy to use with solderless breadboards. Reversing the polarity of the leads will reverse the direction of the motor rotation.
The electrical connections where the wires attach, like on any small motor of this type, are subject to breaking when being flexed repeatedly. We toss in a zip tie which can be placed around the motor and leads to strain relieve them.
Like most small hobby motors in this form factor, there are no specific provisions made for mounting. These motors are typically clamped, glued, Velcroed or zip-tied in place.

Specifications

Key Features

Evaluation Results:

These small ‘130 size’ DC motors are designed to work from 3 to 6V DC for typical battery use, but they will also work fine for periods of time on 5V such as if experimenting with PWM or DC voltage for motor speed control. Speed and current will vary with the voltage and load the motor is being operated at.
The fan blade is a simple press fit onto the shaft and allows the rotation of the motor shaft to be more easily observed which is handy when playing with speed control. The blades are made of a soft plastic to avoid damage to fingers or things if it is bumped while spinning.
The male jumper pins make these easy to use with solderless breadboards. Reversing the polarity of the leads will reverse the direction of the motor rotation.
The electrical connections where the wires attach, like on any small motor of this type, are subject to breaking when being flexed repeatedly. We toss in a zip tie which can be placed around the motor and leads to strain relieve them.
Like most small hobby motors in this form factor, there are no specific provisions made for mounting. These motors are typically clamped, glued, Velcroed or zip-tied in place.