5PCS Nano V3.0 ATMEGA328P Module For Arduino(Nano X5)

Detailed Information About The Product:

Name：5PCS Nano V3.0 ATMEGA328P Module CH340C 5V 16M Mini USB Micro-Controller Board for Arduino(Nano X5)
The Nano for arduino is a compact board similar to the UNO.The Nano for arduino is a small, complete, and breadboard-friendly board based on the ATmega328P (for Arduino Nano 3.x). It has more or less the same functionality of the for Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions.
The Nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analog
Referencefunction. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality.

The Nano for arduino has a number of facilities for communicating with a computer, another for Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication.
Microcontroller:Atmel Atmega328P-AU MCU
Operating Voltage (logic level):5 V
Input Voltage (recommended):7-12 V
Input Voltage (limits):6-20 V
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:8
DC Current per I/O Pin:40 mA
Flash Memory:16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM:2 KB (ATmega328)
EEPROM:1 KB (ATmega328)
Clock Speed:16 MHz
Support USB download and Power
Support for external 5V - 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
Dimensions:0.73inch x 1.70inch
Length:45 mm
Width:18 mm
Weigth:5 g
Colour:Photo Color
Material:ABS

Package Contents:
5 x Nano V3.0 ATMEGA328P Module

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.