433Mhz 4 Ons Garage Gate Door Opener Duplicator

433Mhz 4 ons Garage Gate Door Opener Duplicator Copy Remote Controller 433.92MHZ Remote Control Clone Cloning e Car

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Description
Material: Plastic.
Color: s show.
Type: Wireless remote.
For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on.
Rated voltage: 12V 27A  Battery(included).
Wireless transmission distance: 50-150 (m). (open space)


Features
Multi-functional and multi-variable, personalized and user-friendly simple design and fast to use.
This smart copy remote control is suitable for electric door remote control, telescopic door remote control, garage door remote control.
Cloning chip types:
2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as length as the digital portion of the chip can be the same model.
Note: We usually do not recommend copying a rolling e chip, because there are many uncertainties when copying a rolling e chip. When copying a rolling e chip remote control, it is not possible to determine whether the remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling e remote control.


Use steps:
1. Clear e: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose on until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear e is successful(four keys all empty); if after you press any on of the remote control, the light is still on, it indicates that the e has not been cleared successfully. You need to re-clear, and only successfully clearing the e can cloning be successful. You can repeatedly clear and clone the e.
2. Copy: left hand taking the remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key e on remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the matching remote control.
3. Restore: When you accidentally clear the copy of the remote control e, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light length, this Indicating that the e for the remote control is restored. Before using our copy remote control, please be sure to remove the existing e from the remote control.
4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:
(1) first clear e;
(2) after clearing e, copy the unsuccessful key again, and there is no need to copy the rest ons;
(3) and then clear the e again;
(4) restore e; at this time, the keys that were not successfully copied are now covered by new es, and the keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.


Precautions:
1. Select the remote control of the prerequisite: the remote control function is normal, remote control chip is the same or compatible, remote control operating frequency the same.
2. The remote control can only copy the fixed e, learn the e chip and part of the single-chip remote control (can copy the chip model see copyable chip type).
3. Two-way remote control, rolling e remote control, single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.
4. Before copying the remote control, make sure that the existing e on the remote control has been cleared and check that the e is cleared successfully. Otherwise, it cannot be copied.
5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the on on the remote control to send the signal completely normal, and then press the on on the remote control to ensure that the function is completely copied.



Package included:
1 * 433MHZ remote control duplicator.



Notes:
1. Please allow 1-3mm differs due to manual measurement.
2. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.