3in1 Battery Balancer LiPo/LiFe 2-6S Cell Balancing

Description:

1. Use high-quality materials, durable 2. Delicate and beautiful appearance 3. High precision large screen balanced discharger, effectively solving the imbalance problem of lithium battery ar use 4. It can detect the voltage of each cell at any time, discharge protection function, and balance the voltage of each cell 5. Wide range of use : Support battery type: Li Po/Li Fe 2 ～ 6 cells (The nominal voltage is 7.4V~22.2V, and the tap is used) Receiver battery: 1.2V ～ 8.5V DC (Not limited to battery type, but it needs to be externally connected with 7.4V~11.1V, and use JST connector) Setting range of balance voltage (lower limit): 2.0V~3.9V (default 3.3V) Discharge voltage setting range (lower limit): 3.0V~4.2V (default 3.9V) Discharge current (4.0V/Cell): about 450mA Support battery port: conventional battery linear port Jst plug port Rx port Strongly prompt: 2 batteries cannot be inserted at the same time! Only one port can be used at a time. Otherwise, the arrester may be overloaded and burnt How to use the balance function?? Insert the balancing head of the lithium battery pack into the corresponding socket, pre the Balance key, and the bulb pattern will be displayed behind the battery. A small balance will appear on the screen, corresponding to the text Balance mode, that is, ar balancing, the bulb pattern will disappear, and the balancing will end. Pre Cancel to exit balance mode. How to use the discharge function?? Insert the balance head of the lithium battery pack into the corresponding jack, pre the Discharge key, the bulb pattern will be displayed behind the battery, and a battery cluster will appear in the screen, corresponding to the word Discharge mode, that is, discharging. When the battery voltage is lower than the set battery value, the bulb pattern will disappear, and the discharge is completed. Pre Cancel to exit balance mode. How to set the voltage?? Insert the balancing head of the lithium battery pack into the corresponding socket, click Cancel, and the screen will display Balance Voltage limit, and then pre Discharge or Limit to adjust the value. Ar adjustment, click Cancel to exit. Package included: 1 x 3in1 Battery Balancer LiPo/LiFe 2-6S Cell Balancing Discharger Voltage Meter Tester LCD Screen JST Connector for Model

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.