3/8" Inch Lip And Spur Point Drill Bit Round Shank With Adj

Description:
The
lip and spur drill bit is a variation of the twist drill bit which is
optimized for drilling in wood. Conventional twist drill bits tend to
wander when presented to a flat workpiece.
In
wood, the lip and spur drill bit is a solution: The center of the drill
bit is given not the straight chisel of the twist drill bit, but a spur
with a sharp point and sharp corners to cut the wood. The sharp point
of the spur simply pushes into the soft wood to keep the drill bit in
line.

Features:
This spur point drill bit is made of high speed steel for good hardness and durability for woodworking.
The drill bit has a 3/8inch round
shape shank than could fit into many electric
drill
chucks.
Sharp point design could avoid slip and simply push into the soft wood to keep the drill bit in line.
This set comes with an adjustable round drill stop which can be used to set drilling depth.
There is a small L-shape hex key wrench so you can use conveniently to adjust the drill stops.

Specifications:
Drill Bit
Material: HSS4241
Length: 160mm(6.3")
Cutting Edges Length: 63mm(2.48")
Point Length: 12mm(0.47")
Shank Diameter:
9.5mm(3/8")
Stop OD: 19mm(0.75")
Stop ID: 9.5mm(3/8")

Package Includes:
1 x Drill Bit
1 x Drill Stop
1 x Hex Key

Description:
The
lip and spur drill bit is a variation of the twist drill bit which is
optimized for drilling in wood. Conventional twist drill bits tend to
wander when presented to a flat workpiece.
In
wood, the lip and spur drill bit is a solution: The center of the drill
bit is given not the straight chisel of the twist drill bit, but a spur
with a sharp point and sharp corners to cut the wood. The sharp point
of the spur simply pushes into the soft wood to keep the drill bit in
line.

Features:
This spur point drill bit is made of high speed steel for good hardness and durability for woodworking.
The drill bit has a 3/8inch round
shape shank than could fit into many electric
drill
chucks.
Sharp point design could avoid slip and simply push into the soft wood to keep the drill bit in line.
This set comes with an adjustable round drill stop which can be used to set drilling depth.
There is a small L-shape hex key wrench so you can use conveniently to adjust the drill stops.

Specifications:
Drill Bit
Material: HSS4241
Length: 160mm(6.3")
Cutting Edges Length: 63mm(2.48")
Point Length: 12mm(0.47")
Shank Diameter:
9.5mm(3/8")
Stop OD: 19mm(0.75")
Stop ID: 9.5mm(3/8")

Package Includes:
1 x Drill Bit
1 x Drill Stop
1 x Hex Key