product_image_name-Generic-3.3P-5V 3.3V PWM Signal To 0-10V Voltage Converter D/A-1

Share this product

Shipped from abroad

3.3P-5V 3.3V PWM Signal To 0-10V Voltage Converter D/A

₦ 39,510
₦ 68,12142%

In stock

+ shipping from ₦ 7,864 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)

Promotions

Delivery & Returns

Shipped from abroad 

Choose your location

Pickup Station

Delivery Fees ₦ 7,864
Ready for pickup between 27 June and 01 July if you place your order within the next 5hrs 1mins

Door Delivery

Delivery Fees ₦ 8,624
Ready for delivery between 27 June and 01 July if you place your order within the next 5hrs 1mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

CharacterL

86%Seller Score

47 Followers

Follow

Seller Performance

Shipping speed: Average

Quality Score: Excellent

Product details

3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog PLC Module

Features:

1. This module can convert 0-100% PWM digital signal into analog signal.

2. The input digital signal can be a 0-100% PWM signal of 3.3V level.

3. The output analog signal can be 0-10V voltage.

4. Widely used in signal interface switching of PLC, single or other industrial control board.

5. The power supply has reverse polarity protection function.

Specification:

1. Model: 3.3P-5V

Function: Input 0-100% PWM signal of 3.3V level, output 0-10V voltage

2. PWM Signal Receive Frequency Range: 100HZ-3KHZ (1-3KHZ is recommended)

3. Insert the pin at 5V

4. Analog Voltage Output: The following is the output voltage of 0-10V to illustrate

Ar power-on, when there is no input signal, the output is 0V

For the first power-up, a calibration can be done: Input a signal with 50% duty cycle and 3.3V amplitude to DIN- and DIN+. The frequency is 1-3KHZ. Use a multimeter to measure two ports of AO and GND. Adjust the potentiometer on the board to make the multimeter display 5.40V. This calibrate the corresponding relation between pulse signal and this module. The resolution of this module is 0.1V. The output current capability is 10MA. If the percentage of the duty cycle is inversely related to the voltage, you can check the check box of STEP LOW, ACTIVE to set the pins of PWM output in the software.

5. Supply Voltage: 15-30VDC (power requirement of power supply: >100MA), 12V customizable

6. Output Power: About 10MA

7. Mounting Method: 4 * M3 screw hole

Port:

1. DIN+: Positive of PWM signal (For common cathode, connect it to PWM signal; For common anode, connect it to 3.3V of signal terminal)

2. DIN-: Negative of PWM signal (For common cathode, connect it to GND; For common anode, connect it to PWM signal)

3. 12-30V: Positive of power supply

4. GND: Ground of power supply

5. GND: Ground of power supply. It is connected to ground of power supply

6. AO: Output port of analog voltage (0-10V)

Package List:

1 * Digital-Analog PLC Module

image

image image image image image image image image image

ABOUT FEEDBACK

If you are satisfied with our products, Pls give us 5 Stars

Your satisfaction and positive feedback is very ant to us. Please leave positive feedback and 5 stars if you are satisfied with our it and services. If you have any probl with our it or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve any problem and provide you with the best customer services. We wilive you a positive feedback ar receiving the payment. If you are unsatisfied with your it, please contact our Customer Service. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very ant We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily addre your concerns. It is impoible to addre iues if we do not know about them! PAYMENT: 1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW. 2) Payment must be made within of order. 3) If you can't checkout immediately ar auction close, please wait for a few minutes and retry Payments must be completed within . ABOUT SHIPING: 1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO) 2. Orders proceed timely ar the payment verification. 3. We only ship to confirmed order addrees. Your order addre MUST MATCH your Shipping addre. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 6. If you have not received your shipment within the period,  please contact us. We will track the shipment and get back to you as soon as poible with a reply. Our goal is customer satisfaction! 7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery. 8. We seller are not in charge of duty, buyer is responsible for that. Any dispute caused by this is unreasonable. 9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks RETURN AND : 1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your poeion more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half. 2. All returned it MUST BE in the packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#. 3. We will YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its condition and packaging with all components and acceories included, AR BOTH Buyer and Seller cancel the transaction from aliexpre. OR, you may choose to have a replacement. 4.  We will bear all the shipping cost if the product(s) is (are) not as advertised

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.

Specifications

Key Features

  • Origin:Mainland China
  • DIY Supplies:ELECTRICAL
  • Certification:NONE
  • Display Size:2.9 Inches & Under
  • Model Number:3.3P-5V
  • Model::3.3P-5V
  • Signal Converter:Analog Voltage

What’s in the box

1X 3.3P-5V 3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog PLC Module sintetizador Converter Module

Specifications

  • SKU: GE779IP5CRLDANAFAMZ
  • Model: CCHAdianziclyiqi1492
  • Production Country: China
  • Size (L x W x H cm): 10*10*10
  • Weight (kg): 1
  • Main Material: PVC

Verified Customer Feedback

Customers who have bought this product have not yet posted comments

3.3P-5V 3.3V PWM Signal To 0-10V Voltage Converter D/A

3.3P-5V 3.3V PWM Signal To 0-10V Voltage Converter D/A

₦ 39,510
₦ 68,12142%
Questions about this product?

Recently Viewed

See All