This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Shipped from abroad
Free return within 7 days for ALL eligible itemsDetails
csdewv
98%Seller Score
1 Followers
Quality Score: Excellent
Specifications: Material: resin Types: A1, A2, A3 Capacity: 2.5g Color: light yellow(A1), middle yellow(A2), medium dark yellow(A3) Application:It is suitable for filling and restoring cavities on non-occlusal surfaces. Method of operation: 1. Prepare the cavity according to the routine requirements, remove the carious tiue, and clean the cavity. 2. Apply the dental composite resin pretreatment agent (etching agent) to the tooth surface to be bonded, rinse and dry the bonding surface 3. Apply a uniform and thin layer of dental composite resin pretreatment agent (adhesive) on the bonding surface, and irradiate it with a dental light curing lamp for 20 seconds. 4. Take an appropriate amount of composite resin to fill and engrave, and then use a light source with a light intensity of not le than 400mW/cm2 to irradiate for 20 seconds to cure, and the curing depth is ≥1. 5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered curing filling can be used. 5. Perform trimming and polishing, and use dental occlusal paper for and trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips. 6. It is recommended to use the marrow and bottoming materials: calcium hydroxide (light curing or curing) or other non-oily bottoming materials. Materials containing eugenol cannot be used as a direct base. Package included: 1 x Micro Hybrid Composite
Customers who have bought this product have not yet posted comments