150A Hall Current Sensor HCS-150A For FPV Flight Controller

₦ 34,400

₦ 67,07249%

3 units left

+ shipping from ₦ 6,970 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 6,970

Ready for pickup between 28 May and 30 May if you place your order within the next 18hrs 8mins

Door Delivery

Delivery Fees ₦ 7,730

Ready for delivery between 28 May and 30 May if you place your order within the next 18hrs 8mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

rebmaid

70%Seller Score

45 Followers

Seller Performance

Shipping speed: Good

Quality Score: Very Poor

Customer Rating: Excellent

Product details

Detailed Information About The Product:

Hall effect current sensor
No voltage drop and heat on current sensor components
Offset and Sensitivity are calibrated in factory
Made of high-quality materials, sturdy and durable
Easy to use

Offset and sensitivity are factory calibrated
Continuous current rating: 0~150A DC
Sensitivity: 20mV/A, INAV/BF ratio = 200, ArduPilot BATT_AMP_PERVLT = 50
VBAT voltage sensing: 0~69V, INAV ratio = 2100, BF ratio = 210, ArduPilot BATT_VOLT_MULT = 21.0
Power consumption: 17mA
Voltage offset error at zero current: +-10mV
Current output voltage error: 5%
Operating temperature: -30~80 °C
Vbat: for voltage sensing, supports 0~69V IN
Voltage: = 1/21 Vbat, 0~3.3V output
Current: current signal, 0~3.3V output
5V: HCS-150A board power supply, supports 4~13V Input, 17mA
G: GND
TX/RX: For firmware update and configuration (to be supported)
Tip: Hall sensor should be installed away from iron and magnetic materials
(Due to different batches, the printed words on the product will be different, which does not affect use)
Material: PCB
colour: As shown

Package Contents:
1 x Hall Current Sensor

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.