12V Sealed Lead Acid Rechargeable Automatic Battery Charger British standard plug

1.Product features：
    High conversion efficiency, energy saving, low operating temperature, components are selected for temperature resistance .

    After the battery is fully charged, it will automatically stop and be transferred to a floating state.At this time, charging has a repairing effect on the battery, so the battery will not vulcanize due to overcharging or insufficient charging, resulting in smaller capacity and shorter service life.

    It overcomes the shortcomings of old-fashioned low-frequency chargers and increases the discharge capacity and service life of the battery.

It has a soft start function, the start-up current is small, and the AC input shock is effectively reduced.
There is short circuit protection, overload protection, and constant current and constant voltage floating charging to protect the charger and battery.
There is overvoltage protection.For accidental failures that cause the output voltage to exceed the standard, the power supply will be turned off to protect the battery, and the output will be restored after the voltage is normal, otherwise charging will be stopped.
There is overheating protection, and the temperature of the power components is monitored.If the use environment is overheated or other overheating is caused, the power supply will be turned off, and the output will be restored after the temperature is normal.
Change color indication, red light is full, green light is charging, the status is clear at a glance.
Under full load operation, the temperature is low and the service life is long.
Each has undergone a 100% full load aging test, and left the factory after passing the strict test.

2.Technical parameters：

Input voltage: 100-240V 60-50HZ
Output current: 1300mA

Battery capacity: 12V

Charging time: 5-7Ah>6 hours; 9Ah>10 hours; 15-25Ah>13-25 hours

Specification performance

13.8V1A(12V1250mA)

Floating charging voltage

15.2 V ±0.5V

Constant voltage output voltage

13.8V ±0.5V

Constant current charging current

0.85-1.25A

Conversion current

450-550mA

DC maximum output power

13W

efficiency

884% (maximum output voltage, full load)

Input voltage range

100～240VAC；50～60HZ

Input current

0.05A/MAX

Temperature coefficient

±0.03%℃（0～50℃）OUTPUT

Operating temperature and humidity

-10℃～＋40℃20%～90%RH

Storage temperature and humidity

-10℃～+60℃20%～90%RH

Dimensions

 85*48*30（mm）

 Wiring length

 Input: 65CM, output, output 85CM

 Connection method

  Red and black wiring clip

Note: 1.The test conditions for the above parameters are: 220VAC input, rated load, 25℃ 70%RH humidity.

3.Instructions for use：

• 1.Red is clamped to the positive electrode and black is connected to the negative electrode.
• 2.It has a repair function.When the indicator light is the color of no-load, it can be recharged for 1 to 10 hours.
• 3.Two-color light indication, automatic stop when full.
  4.With reverse connection protection, it is not afraid of short circuit.
  5.Suitable for batteries below 25ah.

Four, how to use： 

First plug in the power supply, and then connect the battery.

The red line (red alligator clip) is connected to the positive level of the battery (+), and the black line (alligator clip) is connected to the negative level of the battery (-).If it is connected incorrectly, it will automatically protect it from charging, but try not to connect it incorrectly.

Generally, a 7-amp motorcycle battery can be charged for about 6 hours (the larger the battery capacity, the longer the charging time).

The charging current is automatically adjusted with the size of the battery voltage, and there is no need to adjust everything to meet the high-demand customers.