Detailed Information About The Product:
Name:12V 8-Channel 433MHz Wireless Remote Control Switch 100M 8-Key Remote Control for Lamps, Access Control, Motors, Doors
1. This receiver is powered by 12V, and the default is 8 independent relay signal output (that is, without voltage output), and the output terminals are respectively normally open, normally closed, and common (no voltage) can be used. This switch can generally be applied to the following two occasions.
2.With 12V voltage output, this kind of equipment only needs to draw a positive wire from the input end to the common end and then share the negative wire of the input to directly control the 12V or 24 device.
3. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
4. This receiver has the following 8 working modes can be set, 8 channels all jog, 8 channels all self-locking, 8 channels all interlocking, separate several channels of jog self-locking and interlocking coexist. You can do it yourself according to your needs Change the way of working
5. Suitable for remote control electric door, remote control garage door, remote control retractable door, remote control rolling gate, remote control curtain
Product name: DC12V, 24V 8-way remote control switch
Working voltage DC12V/24V
Working frequency: 433MHZ
Working mode: Jog M4/self-locking T4/interlocking L4/jogging and self-locking coexist
Work-to-code method: Intelligent learning type
Working environment: -40~+80 degrees
Receiving sensitivity: greater than equal 105dBm
Output current: inductive less than equal 3.5A: resistive less than equal 6A
Product name: 1000m sticker 8-key remote control
Working voltage: DC12V (12V23A)
Working frequency: 433MHZ
Chip model 1527 or 2264 (different for different batches)
Encoding type: millions of codes or pad type into a password
Oscillation resistance: 4.7 (default)
Modulation method: ASK (stable and less interference)
Remote control distance: 1000 meters (see the description below for the theoretical value of open space without interference)
Colour:white
Material:ABS
Size:
Remote Control Size:120 x 49.8 x 18mm
Remote Control Switch Outer shell: 100 x 80 x 29mm
Remote Control Switch inner panel: 92 x 72 x 17mm
Package Contents:
1 x Remote Control Switch
1 x Remote Control
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.