Package Included:
1 x Relay Wireless Delay Time Switch with box
Features:
1.Model:C-1208
2.Name:Relay Switch
3.Working voltage: DC12V
4.Operating Frequency: 315MHZ /433MHZ
5.Contact capacity:≤5A / 250VAC; ≤10A / 125VAC; ≤20A / 14VDC
6.Receive sensitivity:> - 105dB
7.Remote distance: 100 meters (open area without interference) This distance is open to non-interference in the theoretical distance, use will be reduced depending on the environmental interference and partitions. Typically about 10% -50% of nominal distance.
8.Control approach: a way normally open (normally closed) contacts
9.Coding Type: Fixed code; pads coding
10.Channel: 1CH
11.Three Working mode:interlock: on/off;Delay;Inching (adjust the Potentiometer)
12.Receiving plate size: 42x32mm
13.Protect box size:65*38*22mm
14.Uses: remote control switches, remote control lamps, multi-channel motor control
Way of working
1.A. M4 Jogging
Press the remote control A key, the corresponding relay connection, release the remote control button, the relay disconnect
2. B. L4 interlock
Press the remote control A button, the corresponding relay to connect and keep working; press the remote control B key, the relay disconnect to stop working.
3. C. T4 signal self-locking
Press the remote control A key, the corresponding relay to connect and keep working; again press the remote control A key, the relay disconnect to stop working
4. D. M4 delay, (Jumpers)
Press the remote control A key, the corresponding relay connection, 3 seconds off, followed by cycle work.
J1-delay 5 seconds, J2-delay 10 seconds, 3-delay 60 seconds,
J1 \ J2-delay of 20 seconds, J1 \ J3- delay 2 minutes, J2 \ J3-5 minutes
J1 \ J2 \ J3- delay 10 minutes
