110V~240V Wireless Doorbell Infrared Sensor Motion Entry Door Bell Alarm w Receiver nsmitter EU US Plug Hot

& nsmitter EU/US Plug Hot

Features:

1. Wirele doorbell to remind you the coming of your guests by lovely songs.2. 38 songs to choose, and it can be changed from a touch of a on.3. Easy to use, just p the sensor at the ennce to your driveway and the receiver inside your home.4. Great for house, office, hotel, shop, etc.5. Alerts you when someone enters your driveway, walking path, doorway or busine, such as visitors, vehicles, intruders, animals or kids coming or going.Specifications:Condition: 100% and high qualityMaterial: Plastic shellReceiver Working Voltage: 110V-240Vnsmitter working voltage: 4.5V 3x AAA batteries(not included)Working range: Up to 70 metersInfrared sensing distance: 3-7 metersReceiver on control:Music source: 38 different songsVolume adjustment: high, middle, lowVoice: Can set it with light and voice / with light and no voicePlug: US Plug, EU Plug (optional)(please note if it is fit for your country standard )Pattern: 1 Receiver & 2 nsmitter, 1 Receiver & 2 nsmitter,2 Receiver & 1 nsmitter, 2 Receiver & 1 nsmitter (optional)nsmitter: Approx. 80 * 59 * 45mm/3.15 * 2.32 * 1.77 inchReceiver: Approx. 76 * 80 * 33mm/2.99 * 3.15  * 1.30 inchWeight: Approx. 226-237g

How to Use:1. P the correct batteries in the .2. e sure that the batteries have been put in the proper positions.3. Mount the properly by the front door, window frame , driveway, walk path , backyard or anywhere you need.4. Then switch on the receiver and adjust the volume to either high or low position.5. Now the remote detective system is operating with the infrared detect technology.6. P the receiver in an easy to reach p.7. When the senses motion , the receiver will e an audible sound & the LED light will f.8. Please wait for 30 seconds after switching on detective & receiver to activate.9. Please install both units 3 feet above ground level for optimal performance.How to care and maintain:1. Please keep the & receiver in sheltered ps to avoid contact of both units form water and direct sunlight.2. When the LED indicator does not go on , the battery power is either low or dead. At that time you should change the batteries.3. Clean the detective regularly with a damp cloth to avoid blockage of sensor by dirt or any small particles.4. Try to keep it in areas where it will not get wet. In addition, during heavy storms & snowfalls, it is recommended that unit should be moved indoor or in a safe p.5. Never attempt take apart the units.6. When the unit is not in use, take out all batteries; clean both units and store the units in dry , cool p.7. The device is not a toy and should keep out of reach from children.

Package Included:1 * Set of Wirele Door Bell nsmitter and Receiver with Acceories