10G USB 3.1 Type C To A Flat Extension Ribbon Cable Male/Male 90 Slim Flexible FPC Charge FPV Brushless Handheld Gimbal Monitor

Double 90 Degree USB 3.1Type A Type C FPV Flat Male To Male Ribbon Cable Extension Data Aerial Photography Cord for GPS Navigator, ROCK Pi 4 Raspberry Pi SLR Handheld Pan/tilt

Brand name: ADT-LINK

Product name: USB 3.1 Type-C male to Type-A male flat cable

Product model: UTS3-MM-13P series

Transfer speed: 10Gbps within 50cm ; 5Gbps within 200cm

Wire length: 3~300 cm, the length can be customized,

Current capacity: 3A within 50cm ; 1.5A within 1 meter

Product application: GPS navigator, ROCK Pi 4 Raspberry Pi microcontroller development board, built-in USB device to extend the use of adapter.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk ar testing and verifying that they are correct. Use attention: USB-Ais connected to the host port; USB-Cis connected to the hard disk camera and other devices

Purchase restriction: This product is designed to connect to built-in USB devices. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes and does not support returns and exchanges. Please consider carefully before placing an order.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Product Model description:

Product Name Product Model USB speed C-type straight male ( slave ) to A-type straight male ( master ) US1B-UT1A Positive plug 3.1; Reverse plug 3.1 C-type straight male ( slave ) to A-type Up-Bend male ( master ) US2B-UT1A Positive plug 3.1; Reverse plug 3.1 C-type straight male ( slave ) to A-type Left-Bend male ( master ) US2L-UT1A Positive plug 3.1; Reverse plug 3.1 C-type straight male ( slave ) to A-type Down-Bend male ( master ) US3B-UT1A Positive plug 3.1; Reverse plug 3.1 C-type straight male ( slave ) to A-type Down-Bend male ( master ) 02 US3R-UT1A Positive plug 3.1; Reverse plug 3.1 C-type Up-Bend male ( slave ) to A-type straight male ( master ) US1B-UT2A Positive plug 3.1; Reverse plug 3.1 C-type Up-Bend male ( slave ) to A-type Up-Bend male ( master ) US2B-UT2A Positive plug 3.1; Reverse plug 3.1 C-type Up-Bend male ( slave ) to A-type Left-Bend male ( master ) US2L-UT2A Positive plug 3.1; Reverse plug 3.1 C-type Up-Bend male ( slave ) to A-type Down-Bend male ( master ) US3B-UT2A Positive plug 3.1; Reverse plug 3.1 C-type Up-Bend male ( slave ) to A-type Down-Bend male ( master ) 02 US3R-UT2A Positive plug 3.1; Reverse plug 3.1 C-type Left-Bend male ( slave ) to A-type straight male ( master ) US1B-UT3A Positive plug 3.1; Reverse plug 3.1 C-type Left-Bend male ( slave ) to A-type Up-Bend male ( master ) US2B-UT3A Positive plug 3.1; Reverse plug 3.1 C-type Left-Bend male ( slave ) to A-type Left-Bend male ( master ) US2L-UT3A Positive plug 3.1; Reverse plug 3.1 C-type Left-Bend male ( slave ) to A-type Down-Bend male ( master ) US3B-UT3A Positive plug 3.1; Reverse plug 3.1 C-type Left-Bend male ( slave ) to A-type Down-Bend male ( master ) 02 US3R-UT3A Positive plug 3.1; Reverse plug 3.1

Note 1: Speed : Support 10g/bps high speed within 50cm, 5g/bpswithin 1 meter

Note 2: (Master) means connecting to the host port; (slave) means connecting to devices such as hard disk box cameras,etc Product Image: Product real shot:

Summary of technical iues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shieldingfor Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

About shipping

Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 




Special Announcement:

Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .




Your 100% satisfaction is very ant to us

If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.