10A 250W/500W Boost Converter Constant Voltage Constant Current Drive Power Supply Module DC-DC Step Up Module Voltage Regulator

10A 250W/500W Boost Converter Constant Voltage Constant Current Drive Power Supply Module DC-DC Step Up Module Voltage Regulator

10A 250W Boost Converter Described as follows:

Module name: 250W boost constant current module Module properties: non-isolated step-up module (BOOST) Input voltage: DC 8.5V-48V Input current: 10A (MAX) exceeds 8A please enhance heat diipation Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet) Output voltage: 10-50V continuously adjustable Constant] range: 0.2-8A Temperature: -40 -85℃(ambient temperature is too high, please enhance heat diipation) Operating frequency: 150KHz Conversion efficiency: up to 96% Overcurrent protection: There Input reverse polarity protection: Yes, Installation: 4 3mm screw holes Connection method: Connection Output Module size: 70mm * 36mm * 13mm Single module: 50 g

Applications:

1, DIY a power supply, 12V can input and output can 12-50V adjustable. 2, the power supply for your electronic device, according to your system can set the output voltage value. 3, as the car power supply for your laptop, PDA or a variety of digital products supply. 4, DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books. 5, solar panel regulator. 6, to the battery, rechargeable lithium batteries. 7, driving high-power LED lights.

Package included:

1 x DC DC boost converter Constant Current Mobile Power supply 250W 10A LED Driver

10A 500W Boost Converter Described as follows:

Descripition:

Module name: 500W boost constant current module

Module nature: Non-isolated boost module (BOOST)

Input voltage: DC8.5V-48V

Input current: 15A (MAX) over 8A, please strengthen heat diipation, otherwise it may be damaged

Quiet working current: 10mA (when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)

Output voltage: 10-50V continuously adjustable

Output current: 10A MAX (related to the input and output preure difference, the greater the preure difference, the smaller the output current, if the output current exceeds 5A, add a heat sink or fan for heat diipation)

Constant current range: 0.2-10A

Output power: = input voltage*10A, such as: input 12V*15A=180W, input 24V*15A=360W,

Input 36V*10A=360W, input 48V*10A=480W,,,

If you need more power, you can use two modules in parallel. For example, if the output is 10A, you can use two modules in parallel and adjust the current of each module to 5A.

Working temperature: -40~+85 degrees (please strengthen heat diipation when the ambient temperature is too high)

Working frequency: 150KHz

Conversion efficiency: up to 96% (efficiency is related to input, output voltage, current, and preure difference)

Overcurrent protection: Yes (output over 10A, automatic protection, there is a certain range of error. The protection mode is to stop the boost, the output still has voltage)

Input reverse connection protection: Yes, (le than 5A, if you need more reverse connection current, please connect a diode in series with the input)

Module size: length 70mm width 42mm height 13mm

Module weight: 50 grams

Product application range:

DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.

To supply power to your electronic equipment, you can set the output value according to your system voltage.

As a car power supply, it can power your laptop, PDA or various digital products.

DIY a high-power laptop mobile power supply: equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.

The solar panel is stabilized.

Charge storage batteries, lithium batteries, etc.

NOTE:

Do not adjust the current in a short-circuit method. The circuit structure of the boost module cannot be adjusted in a short-circuit method. Please make sure that the output voltage is greater than the input voltage; when large current output, please ensure good heat diipation; when the load is large, the module must first be connected to the input Voltage, then connect the load.

10A 600W Boost Converter Described as follows:

Module name: 600W boost constant current module

Module nature: non-isolated step-up module (BOOST) Input voltage: DC 10V-60V Input current: 10 (MAX) Static operating current: 10mA (12V liters 20V, the higher the output voltage will be too much static too much) Output voltage: 12-60V continuously adjustable (default output 19V shipping, for other voltage please note to the treasurer.) Output current: 10A MAX more than 6A please strengthen the heat (with the input and output preure, the greater the difference in output current smaller) Constant current range: 0.2-10A Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W, Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: 92% -96% (efficiency and input, output voltage, current, preure related) Input reverse connection protection: no (note positive and negative do not reverse) Installation: 4 3mm screw holes Wiring method: wiring output Module size: length 85mm wide and 52mm high 21mm Module weight: 80 grams

First, the output voltage regulation:

1, adjust the CV-ADJ potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Clockwise voltage is small, counterclockwise adjustable

First, the output current regulation:

2, clockwise CC-ADJ potentiometer about 20 laps, the output current is set to a minimum, connected to the LED, CC-ADJ potentiometer to the required current. For battery charging, put the battery ar the end of the power, then receive the output, adjust the CC-ADJ to the current you need, (for charging must be used when the battery is fully charged, because the battery left The more charge, the smaller the charge current.

Please do not use the short circuit to adjust the current, the boost module circuit structure can not be short-circuit way to tune.

Package included: 1 X 600W boost constant current module

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.