1-8s New Two-in-One Battery Indicator/BB Ringing Low Voltage/Alarm/Electric Display/Dual Function Buzzer

1-8s New Two-in-One Battery Indicator/Bb Ringing Low Voltage/Alarm/Electric Display/Dual Function Buzzer

• Applicable Object: Remote Control Aircraft
• Accessory Type: Battery

Product Introduction:
This Voltage Display Is Used for 1S ~ 8S Lithium Battery Detection, and Automatically Detects the Voltage and Total Voltage of Each Cell of Lithium Battery. It Supports Reverse Connection Protection.
It Allows You to Know the Working Status of Your Battery Anytime and Anywhere, So That the Battery Will Not Be Damaged by Overdischarge Or Overcharge.

Whether in Flight Or Idle State, You Can Plug the Power Display into the Battery Balance Charging Connector to Understand the Battery Power Status.

There Is No Multimeter!

When the Voltage Is Lower than the Set Value, the Buzzer Will Ring and the Red LED Light Will Flash; the Factory Default Setting Value Is 3.3V. Press Button to Change the Voltage Setting Value and Automatically Save the User's Current Setting Value.

Product Parameters:

1. Used for 1s-8s Lithium Battery Detection
2. Voltage Detection Accuracy: ± 0.01V.
3. Group Voltage Display Range: 0.5V ~ 4.5V
4. Total Voltage Display Range: 0.5V to 36V
5.1S Test Mode Voltage Range: 3.7V ~ 30V
6. Low Voltage Buzzer Alarm Mode 2s-8s
7. Alarm Voltage Setting Range: off ~ 2.7~3.8V
8. Size: 40mm X 25mm X 11mm

9. Loud Alarm Sound (with Special Frequency, Alarm Sound Can Be Heard Even in Noisy Environment)

10. Weight: 9G

Usage:

Put the Electric Display Front up (the Side of the Digital Display), Pin to Yourself, Insert the White Balance Charging Plug of the Battery along the Pin on the Left Side of the Electric Display, and the Electric Display Will Immediately Bb Ringing Twice, the Jump Number Is Displayed on the Screen. If There Is No Response, Just Plug the Balance Charge Plug in. There Is a One Small Button on the Other End of the Display to Set the Alarm Voltage of the Display.