DIY Wall Clock With Digital Stickers - Night Light Wall Clock/Home Decor

DIY Wall Clock With Digital Stickers - Night Light Wall Clock/Home Decor

Features:

• 1. Stickers made of EVA Foam Materia and Mirror materiall,which is non toxic and non fading ,can last for about 3-5 years.
• 2. Stickers can be removable ,with glue on the backside, easy to paste on the wall or any other clean and smooth surface; such as door ,the closet and so on;
• 3. The mirror with glue, before to paste the sticker on the wall, you need to paste the mirror on the sticker surface first;
• 4. Diy design, clock layout size measured by hands, can be ajust to be smaller or bigger size
• 5. Sticker material: EVA Foam (Ethylene vinyl acetate)
• 6. Clock material: Best material acrylic, metal

Install:

• 1.Put the trace-less nail into the right position, the small tail should be up.
• 2.Put off the screw button from clock disc, then put on the scale and hang to the trace-less nail. It is better fix the scale by using the adhesive tape.
• 3.Cutting the scale depend on your wall size.
• 4. The Scale has 12 black lines for the right position, move the ruler to each grid, using the pencil to mark the position ,the balack lines should be parallel to locate the sicker easily.
• 5.Taking off the UV film from the clock pointer
• 6.Taking off the screw from clock dial, then put the pointer, first for second pointer, after for minutes pointer
• 7.Hang the clock to the trace-less nail
• 8.Taking off the paper from the mirror
• 9.Put the mirror surface to each EVA sticker, then take off the UV film from mirror
• 10.Put the EVA sticker to the position you marked .
• 11. Follow this step you will get down.

Features:

The wall clock is 3D effect

Easy to install and remove the sticker

Alloy clock face,aluminum clock pointer and EVA foam stickers;

The clock finishing size is depends on your preference to decorate your wall, DIY distance from different digits, and DIY shape of the digits

The decals can be applied on all smooth surfaces,such as Walls, Doors, Windows, Closets, Plastic, Metal, Tiles etc.

How to Install ?

STEP1: Clean the walls and keep them dry, Fasten the clock movement on the wall
STEP2: Peel off protection film from mirror,stick it on the EVA number.Cover the clock movement with the auxiliary scale,stick the numbers at the right site according to the scale.
STEP3: Take down the clock movement,fixing the hour hand ,then minute hand.Tips:press the clock hands into the clock axle and point at 12 o'clock.
STEP4: Adjust the time by button on the clock movement and install the battery.
STEP5: Hanging the clock movement on the wall.

STEP6: Well done!You can enjoy your art-work now