500W MPPT Solar Grid Connected Inverter 12V 24V 36V 48V 60V 72V To AC 110V Or 220V Adjustable Battery Discharge Power

500W MPPT Solar Grid Connected Inverter 12V 24V 36V 48V 60V 72V to AC 110V or 220V Adjustable Battery Discharge Power

Wholesale consult the service of store .

Product Description

500W Grid tie micro inverter 12v for PV  open circuit voltage range:16v-28v AC90V-140V or 190V-260V, workable for 300W-560W solar panesl  or 12v Battery

Product Features: 1. 16V~28V inverter connected solar panel: open circuit voltage of 16V~28V, mppt 12v-22v dc or 12V battery; 2. Battery mode (automatic identification) with battery low voltage protection. 3. Battery mode output power manual adjustment function. The latest updjustable power inverter

1) adds a new solar panel and battery operation mode switch (two independent mode operation, safe and reliable)

2) rotary switch from 100W to about 370W any mobilization

3) In battery mode, the new increase can be recorded each time you turn off the last set output power

Specifications:

PV grid-connected inverter operating mode

The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion proce. Coversion proce includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find.

Startup - When the start on is on, solar panel and grid lines both connected in normal condition, inverter enters working condition.

Grid-tied begin - Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions.

Standby - Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode.

Stop - Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode.

When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator.

Adjustable configuration panel

Battery (battery) power output adjustment mode:

1.the adjustable knob on the inverter to the right twist,Battery power adjustment mode opens,The right of the blue LED light on,At this point the PV inverter MPPT tracking function automatically turns off,Low output machine output power of about 100W, the adjustable knob slowly twist to the right,with the output power gradually increases, the limited battery adjustable maximum output power of about 75% of the total power of the inverter (for example, 500W inverter defined variable will be around 370W, 600W inverter will be limited to 450W)

2. when the inverter is connected to the battery discharge the battery voltage is too low, The inverter will automatically stop to protect the battery output voltage is not too low,At this point you can not cut off the DC line between the inverter and battery,You can use other independent solar charge controller to the battery charge,When charging the battery is full,When 26 ~ 42V inverter connected to 24V battery:The inverter will automatically start and the net output (for example,Battery voltage into about 21V, the machine will automatically shut down, this time with another charge controller to the battery charge,When charged to about 25V, the machine will automatically begin to work), Charging without human intervention.

3.Battery (battery) mode, a plurality of sub-voltage specifications in the following table .

table

PAYMENT/SHIPPING

duties,es and charges are not included in the item price or shipping charges. These charges are Buyer’s responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. For custom clearance procedure. If you need help, please let us know. Remote area addition fee （ & ） A Remote Area is defined as a post code or in the absence of post code, a suburb /town name that is difficult to serve. A delivery to one of the following post codes and towns would attract a Remote Area surcharge. For Expre shipments, a pickup from one of the same post codes and towns would attract a Remote Area surcharge. Please refer to your service guide for the surcharge amount in local

WARRANTY/QUALITY:

CE certified. 100% QC before shipment. Standard 1 year product warranty Warranty will cover only it that are deemed to fail under normal usage. Accidental damage due to envmental causes or incorrect usage and installation will not be covered in warranty (but still serviceable) Contact us directly for warranty iues Buyer is responsible for warranty return shipping.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.