Corning 6795-600D Hot Plate With Digital Display 10 Inch

The Corning hotplate 6795-PC 600D has a digital LED temperature display in degrees C, a 10 x 10-inch glass-ceramic plate surface, a microprocessor-based temperature control unit, and a three-prong plug that works with a 100V/60Hz power source. This hotplate is used by researchers, professionals, and hobbyists to heat a variety of liquids and solutions in chemistry, food and beverage, biology, lab, and home applications.

This Corning hotplate has an illuminated power indicator. The temperature display blinks until set temperature is reached. The glass-ceramic plate surface is scratch, corrosion, and chemical resistant, and has good cleaning ability. Its two-piece casting design deflects spills from the electrical area, and includes a built-in rod mount support. An angled front panel and a large knob minimize damage from spills. A microprocessor-based control unit maintains consistent and repeatable temperature settings of 5 to 550 degrees C (+ or - 2 degrees C), adjustable in increments of 5 degrees C. The device can work with a temperature controller and support rod (sold separately). Overall dimensions are 4.25 x 15.8 x 10.6 inches (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The 6795-PC 600D meets European Standards.

Researchers, professionals and hobbyists use hot plates to heat a variety of liquids and solutions in chemistry, food and beverage, biology, lab, and home applications. Hotplates can have either a digital or an analog display, and can show temperature range, or stirring speed. Hot plate surfaces are commonly made of ceramic glass, or stainless steel, and have coatings such as porcelain. They come in a variety of dimensions. Some units can work with stirrers that can be supported with clamps and rods.

Corning Incorporated manufactures consumable glass, ceramics, and plastic laboratory tools for life science research, industrial, and educational applications. Founded in 1908, Corning Inc. is headquartered in New York, NY and makes ISO-certified products.

Corning digital hot plates, stirrers, and stirring hot plates are made with the same durability and quality Corning has been putting into Pyroceram® top products since 1964. All models include a Pyroceram top and a two-year warranty.

• Twin display stirring hot plate shows both temperature and stirring speed on separate digital displays to ensure accuracy. Accuracy within ±2°C and stirring speeds at ±5% of the speed setting you choose
• Digital displays indicate when set temperature and stirring speeds are reached
• Safety indicators – power button and hot top indicators warn if unit is plugged in or is too hot to touch
• Angled front panel and large knobs minimize damage from spills
• PC-400D/410D/420D top plate size: 5 x 7 in. (12.7 x 17.8 cm)
• PC-600D/610D/620D top plate size: 10 x 10 in. (25.4 x 25.4 cm)