HomeElectronicsCar & Vehicle ElectronicsCar ElectronicsCar AudioCar Stereo ReceiversCar Jump Starter Cable & Power Bank - 99800mAH - Torch Light
/product/87/8277482/1.jpg?6101)
Share this product
₦ 60,000
Few units left
+ shipping from ₦ 1,000 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Choose your location
Pickup Station
Delivery Fees ₦ 1,000
Ready for pickup between 12 October and 13 October if you place your order within the next 14hrs 0mins
Door Delivery
Delivery Fees ₦ 1,600
Ready for delivery between 12 October and 13 October if you place your order within the next 14hrs 0mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
JOYSTAN
66%Seller Score
120 Followers
Seller Performance
Shipping speed: Excellent
Quality Score: Excellent
Cancellation Rate: Very Poor
Product details
To Use1. Select the appropriate voltage and connector for the electronic device to charge / power supply
2. Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3. Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5. Press the switch five seconds to start if you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform.
6. Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug
2. Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3. Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5. Press the switch five seconds to start if you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform.
6. Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug
Specifications
Key Features
To Use1. Select the appropriate voltage and connector for the electronic device to charge / power supply
2. Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3. Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5. Press the switch five seconds to start if you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform.
6. Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug
2. Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3. Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5. Press the switch five seconds to start if you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform.
6. Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V car, please make sure at least two LED lights of EPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug
Specifications
- SKU: GE779EA4RD5B8NAFAMZ
- Product Line: JOYSTAN
- Model: Na
- Weight (kg): 4
- Color: Multi
- Main Material: Plastic
- Shop Type: Jumia Mall
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
Related results
HD car stereo radioReceiver and remoteLogitech unifying receiverMicrophone receiver for phoneCar stereo with bluetooth for ToyotaCar mp4 stereoStereo soundbarsCar stereo with dashboardCar stereo with namplifierAV receiverCar stereos and cd playerReceiving fleece blanketsWiFi receiverFM radio with stereo soundLapel mic with receiverMultiband receiver with alarmBaby receiving bedsheetsMercedes Benz car stereoTWS stereo earbudsToyota Corolla stereoMouse with USB receiverAndroid receiver6.3 mm stereo plug3.5mm stereoBluetooth stereoRemote control for receiverUhf receiverX6 car receiverTransmitter with receiverStereo sport headset with TF card
/product/87/8277482/1.jpg?6101)
Car Jump Starter Cable & Power Bank - 99800mAH - Torch Light
₦ 60,000
Questions about this product?
