Avsty WiFi Extender, WiFi Extender 2.4G Coverage to 12880 sq. ft & 55 Devices, Supports Ethernet Port, Faster Speed, Compatible with Multiple Devices

Setting up via WPS:

1. Press the side button on your repeater once. The first light will start blinking rapidly, indicating it is in WPS pairing mode.

2. Activate WPS mode on your main router (usually by pressing its WPS button. The method may vary—some require a short press, others a 2-second hold. Please check your router's manual).

3. After both devices are in WPS mode, they should connect within about 10 seconds.

4. Wait approximately 30 seconds for the repeater to complete its automatic configuration. Once finished, the *second and third lights* on the repeater will stay steadily on.

5. The extended Wi-Fi network is now ready. You can find it on your phone as **"Your_WiFi_Name_EXT"** (using the same password as your main Wi-Fi).

Setting Up via Smartphone:

1. Plug in the repeater and wait for it to fully start up (about *40 seconds*).

2. On your phone, go to Wi-Fi settings and connect to the repeater's network (the name will be similar to *Repeater_XXXX*).

3. Your phone should automatically open a browser to the setup page. If it doesn't, open a browser manually and enter *192.168.11.1* in the address bar.

4. On the setup page, first choose your language and then click *Login*.

5. Select *Repeater Mode* as the operation mode.

6. The repeater will scan for nearby Wi-Fi networks. Choose the network you want to extend and enter its password.

7. Wait for the configuration to complete. Once done, your repeater will restart and extend the selected Wi-Fi network.