Anker USB 3.0 & ESATA To SATA Hard Drive Docking Station

Simple to use. Lightning speed. Multi-compatible. A premium dock for your 2.5" and 3.5" hard and solid state drives.

Diversity in compatibility.

No need to mess with multiple wires, ports and connections. Now, a drive that accommodates both 2.5" and 3.5" HDD or SSD firmly in place and the e-SATA interface accommodates all SATA standards (SATA, SATA II, SATA III).

Optimized for speed.

Imagine what you could do with more time on your hands. The possibilities are endless. Equipped with both USB 3.0 and e-SATA ports, this docking station transfers your data at up to 5Gbps (3Gbps for the e-SATA port). Transfer large volumes of data in just minutes, instead of hours.

Simply minimalist.

Lose the screws: our docking station snaps your hard drive in place, keeping itfirmly and securely stored. The two-colored LED indicator shows power status and data activity. If you need to disconnect, rather than unplugging the power cable, a power button protects your data when not in use.

For optimal use.

• Your drive cannot be accessed via both eSATA and USB 3.0 ports at the same time. If both are connected, only the eSATA-connected computer will be recognized and interact with the drive.

• Do not attempt to remove your HDD or SSD device while it is active. Please power off the docking station before removing.

• The following Seagate SATA drive models will require a firmware upgrade, downloadable from the Seagate official site, before use: ST3000DM001/9YN166/3TB;ST2500DM001/9YN16L/2.5TB;ST2000DM001/9YN164/2TB; ST1000DM003/9YN162/1TB;ST500DM005