Visbella Alloy Wheel And Rim Repair Kit

Visbella Alloy wheel repair kit is designed to permanently repair curb damages, scratches, slight dents, installation damages, sanding marks and other damages to alloy wheels, synthetic wheels, steel rims and hubcaps, and many more on similar surface material. Kit includes everything you need to fix scuffs and scratches in short time.

Features:

·         HIGH QUALITY -- Wheel repair kit dilutes the traces of the wheel surface and is resistant to both vibration and heat up.

·         APPLICATION -- Designed to repair damages, scratches, slight dents and other damages to a car wheel. Save your money and valued time.

·         CONFIRM THE REPAIR AREA: If it is slightly damaged, use wet sandpaper to accommodate the outlines to the repaired surface and lacquer repair area with alloy silver.

·         IF THE DAMAGE AREA IS LARGE OR WITH DENTS: Then use the repair adhesive: press out the needed repair adhesive to a mat. Mix 2 components to a consistent grey mass with spatula provided. (Finish the mixing within2-4mins)

·         REPAIR: Fill with the mixed adhesive to overflow the damaged area. Allow it dry for 15mins.

Product Instructions:

1.     Preparation: clean the damaged alloy wheel with an Alcohol prep pad and remove rough edges and most uneven around the damaged area.

2.     Confirm the repair area. If it is slightly damaged, use wet sandpaper to accommodate the outlines to the repaired surface and lacquer repair area with alloy silver.

3.     If the damaged area is large or with dents. Then use the repair adhesive: press out the needed repair adhesive to a mat. Mix 2 components to a consistent grey mass with spatula provided. 

(Finish the mixing within2-4mins)

4.     Repair: Fill with the mixed adhesive to overflow the damaged area. Allow it dry for 15mins.

5.     Accommodate the outlines: use wet sandpaper to accommodate the outlines to repaired surface. 

If necessary, please repeat steps 3 & 4.

6.     Lacquering: clean the repair area and apply a thin layer of lacquer by brush. The skin time of lacquer should be at least 12 hours before using the car, and the full cure will take 3 days.

Advantage & Features

·         Permanent Repair

·         Easy Maintenance

·         Easy to repair

·         Heat resistant to 130° C

·         Added value -Vibration, Car wash resistant

Precautions:

·         Flammable & Harmful

·         Keep out of reach of children

·         Avoid breathing vapors. Use only in well-ventilated area.

·         Skin and eye irritant! Wash skin thoroughly with soap and water immediately. In case of eye contact, flush with water for 15 minutes. If irritation, consult a doctor