915 Generation 16S 30A 48V LiFePo4 Battery Protection Board BMS With Balanc

of application: 18650 lithium battery protection board, scooter, car protection board, solar street light, LED protection board, motorcycle lithium battery protection board, tricycle power protection board, backup power lithium battery protection board
Continuous Discharge Current: 30A.Instantaneous discharge current:100A. Charging voltage: 60V. Maximum charging current: 30A
Overcharge detection voltage: 3.75±0.025V. Overcharge protection delay: 100±30ms. Overcharge release voltage: 3.6±0.05V. Battery balance detection voltage: 3.6±0.025V. Battery balance release voltage: 3.6±0.05V. Battery balance current: 36±5A. Overdischarge detection voltage: 2.1±0.08V.Overdischarge detection delay: 100ms. Overdischarge release voltage: 2.3±0.1V. Overcurrent detection voltage: 150mV. Overcurrent detection delay: 10ms. Overcurrent protection current: 130±20A.
Overcurrent protection release condition: disconnect load. Short circuit protection condition: external load short circuit Short circuit detection delay: 200uS
Short circuit protection release condition: disconnect load
Main circuit conduction internal resistance: less than 15mohm
Working current: less than 50uA
Sleep current (when the battery is over-discharged): less than 10uA
Temperature range: -30/+80°C
Connection Using:
1. First connect the B- line to the battery negative terminal (the B- line must be soldered with a short wire), and then connect the flat cable ( connecting the flat cable, be to unplug the flat cable from the board)
2. wiring from B-, connect B- to the negative electrode of the battery, connect the second cable B-1 to the first electrode of battery, and connect the third cable B-2 to the second electrode of battery, and the fourth cable B-3 is connected to the ird electrode of battery...and so on
3. Finally, measure whether the battery voltage is to the output voltage of the protection board, and the protection board works normally if it is . note: Different batches, product appearance and color may be different, does not affect the use
Colour:silver + green
Material:Metal+PCB
Size:80 x 55 x 10mm Package Contents:
1 x Protection Board
1 x Cable Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.