6pcs OBD2 Scanner Professional ABS CAN System Diagnostic Ca

Feature:
1. A total of 6 diagnostic cables is contained, meet your different needs, with different colors of connectors, easy to identify.
2. The green cable adapter is intended to allow access to the ABS and power steering system on supported vehicles.
3. The red cable adapter is intended to allow access to the SRS system on supported vehicles.
4. The yellow cable adapter is designed to allow access to a low speed CAN system on supported vehicles.
5. The purple cable adapter is intended to allow access to the electric hood system on supported vehicles.
6. The blue control module adapter wire allows access to enhanced features on the vehicle (eg, multimedia, blind spots, etc.).
7. Gray base control module adapter wire is designed to allow access to basic functions on the vehicle (such as headlights, parking controllers, ABS, electric steering, etc.).

Specification:
Item Type: OBD2 Diagnostic Cable
Material: ABS

Specification:
Green Adaptor Lead (for MultiECUScan /replacement for FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering
Red Adaptor Lead (for MultiECUScan /replacement for FiatEcuScan Adaptor 2) = SRS
Yellow Adaptor Lead (for MultiECUScan /replacement for FiatEcuScan Adaptor 3) = CAN
Purple Adaptor Lead (for MultiECUScan /replacement for FiatEcuScan Adaptor 4) = Electric Hood
Blue Adaptor Lead(for MultiECUScan /replacement for FiatEcuScan Adaptor 5)= Control Module
Gray Adaptor Lead(for MultiECUScan /replacement for FiatEcuScan Adaptor 6)= Base Control Module
Pin Configurations:
Green Adaptor Lead = Female pin 7 to male pins 1,7,9,12.
Red Adaptor Lead = Female pin 7 to male pin 3
Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12
Purple Adaptor Lead = Female pin 7 to male pins 7,8,11,13

Description:
1.Green ABS / Power Sreeing adapter lead ( "Adapter 1" on for MultiECUScan website)
-Designed to allow access to the ABS and Power Steering systems on supported vehicles. This adapter has a green connector on one end for easy identification.
Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 & 12 on the car.
2.Red SRS adapter lead ( "Adapter 2" on for MultiECUScan website)
-Designed to allow access to the SRS system on supported vehicles.
This adapter has a red connector on one end for easy identification.
Using this adapter, Pin 7 on the diagnostic tool is connected to pin 3 only pn the car.
3.Yellow CAN adapter lead ( "Adapter 3" on for MultiECUScan website)
-Designed to allow access to the low-speed CAN system on supported vehicles.
This adapter has a yellow connector on one end for easy identification.
Using this adapter, Pin 6 & 14 on the diagnostic tool are connected to pins 1 & 9
Respectively on the car, Pin 7 on the diagnostic tool is connected to pin 12 on the car.
4.Purple Electric hood adapter lead ( "Adapter 4" on for MultiECUScan website)
-Designed to allow access to the electric hood system on supported vehicles.
This adapter has a purple connector on the end for easy identification.
Using this adapter, Pin 7 on the diagnostic tool is connected to pins 7,8,11 & 13 one the car.
5.Blue Control Module Adapter Wire Design allows access to enhanced features on the vehicle (eg, multimedia, blind spot sensors, etc.)
6.Gray base control module adapter wire designed to allow access to basic functions on the vehicle (eg headlights, parking controller, ABS, electric steering, etc.)
Fitment:
Replacement for Chrysler
Replacement for Dodge
Replacement for FIAT
Replacement for LANCIA.

Package List:
6 x Diagnostic Cable