Home Home & Office Small & Cooking Appliances Small Appliances Vacuum Cleaners60A RC Brushed Electronic Speed Controller For Remote Contr

Shipped from abroad

60A RC Brushed Electronic Speed Controller For Remote Contr

₦ 16,500

₦ 31,67048%

In stock

+ shipping from ₦ 3,838 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 3,838

Ready for pickup between 11 June and 13 June if you place your order within the next 1hrs 29mins

Door Delivery

Delivery Fees ₦ 4,598

Ready for delivery between 11 June and 13 June if you place your order within the next 1hrs 29mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

WorldDeal

82%Seller Score

496 Followers

Seller Performance

Shipping speed: Good

Quality Score: Good

Customer Rating: Good

Product details

Features:
1. Specially designed for RC car with excellent start-up, acceleration and linearity features.
2. Compatible with brush motor, very convenient.
3. With strong resistant current performance, excellent heat dissipation.
4. With multiple protection features like low voltage cut-off protection for lithium or nickel battery / over-heat protection / throttle signal loss protection.
5. Easy to program and compatible with pocket-sized program card.

Specification:
Cont. Current / Burst Current: 60A / 320A
Motor Type: Brushed motor
Suitable Car: 1 / 10
Battery: 2-3 cells Lipo.4-9 cells NiMH
BEC: 5V / 2A (switch mode)

Package List:
1 * Electronic Speed Controller

Instructions:
1. Connect BEC wires with the receiver.
2. Connect motor wires with ESC.
3. Turn on the transmitter.
4. Connect battery pack with ESC then switch on the ESC.
5. When the connection of motor and battery is finished,the motor re-emits "
Beep"
tone.
6. When the throttle stick is in the neutral position,the motor re-emits "
Beep"
tone.
7. The ESC is workable.
Troubleshooting Guide:
1. If motor can't work after power on
, and no sound is emitted, please check the connections between battery pack and motor.
2. If the motor emits a "Beep" tone only, please check all the connections: BEC wires, transmitter and receiver, throttle signal wires, etc. Please check the transmitter TH.TRIM and adjust it to the motor re-emits "
Beep"
tone.
3. If the car can't be speed up, please check either voltage of the battery pack is too low or the temperature of ESC is too high. If the voltage of the battery pack is too low, please replace the battery pack. If the temperature of ESC is too high, please check all connections. If not, please push the button EPA on your remote control.
4. If the car stops suddenly while in working state, please check the motor's connections, and the roadblock.
5. If the car runs in the opposite direction, the transmitter is available. Please swap two wire connections between the ESC and the motor.
6. Set the ESC: ESC uses the jumper cap to set battery type.

Specifications

Key Features

Specially designed for RC car with excellent start-up, acceleration and linearity features
Compatible with brush motor, very convenient
With strong resistant current performance, excellent heat dissipation
With multiple protection features like low voltage cut-off protection for lithium or nickel battery / over-heat protection / throttle signal loss protection
Easy to program and compatible with pocket-sized program card

What’s in the box

1 * Electronic Speed Controller
Instructions:
1. Connect BEC wires with the receiver.
2. Connect motor wires with ESC.
3. Turn on the transmitter.
4. Connect battery pack with ESC then switch on the ESC.
5. When the connection of motor and battery is finished,the motor re-emits "
Beep"
tone.
6. When the throttle stick is in the neutral position,the motor re-emits "
Beep"
tone.
7. The ESC is workable.
Troubleshooting Guide:
1. If motor can't work after power on
, and no sound is emitted, please check the connections between battery pack and motor.
2. If the motor emits a "Beep" tone only, please check all the connections: BEC wires, transmitter and receiver, throttle signal wires, etc. Please check the transmitter TH.TRIM and adjust it to the motor re-emits "
Beep"
tone.
3. If the car can't be speed up, please check either voltage of the battery pack is too low or the temperature of ESC is too high. If the voltage of the battery pack is too low, please replace the battery pack. If the temperature of ESC is too high, please check all connections. If not, please push the button EPA on your remote control.
4. If the car stops suddenly while in working state, please check the motor's connections, and the roadblock.
5. If the car runs in the opposite direction, the transmitter is available. Please swap two wire connections between the ESC and the motor.
6. Set the ESC: ESC uses the jumper cap to set battery type.