5V EG8010 IR2110 Pure Sine Wave Inverter Driver Board 23.4K

Feature:
EG8010 is a digital, fully functional pure sine wave inverter generator chip with dead zone control. It is applied to DC-DC-AC two-stage power conversion architecture or DC-AC single-stage power frequency transformer boost converter. Architecture, external 12MHz crystal oscillator, can realize pure sine wave 50Hz or 60Hz inverter chip with high precision, distortion and harmonics.
The chip adopts CMOS technology and integrates SPWM sine generator, dead time control circuit, amplitude factor multiplier, soft start circuit, protection circuit, RS232 serial communication interface and 12832 serial LCD driver module.
Pure sine wave inverter driver board EGS002 EG8010 IR2110 driver module
Unipolar and bipolar modulation
With dead zone control, the pin sets 4 dead time: 300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time
Real-time processing of voltage, current and temperature feedback
Pin setting soft start mode 1S response time
Serial communication sets output voltage, frequency and other parameters
The external serial port 12832 liquid crystal display module displays the voltage, frequency, temperature and current of the inverter.

Specification:
Model: EG8010
PWM carrier frequency: 23.4KHz
Power supply: 5V
Pin set 4 kinds of pure sine wave output frequency: 50Hz pure sine wave fixed frequency 60Hz pure sine wave fixed frequency 0-100Hz pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
Protection: Overvoltage, undervoltage, overcurrent, overheat protection

Package List:
1 * Module
Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.
.Please note that the new type and old type of this product will be sent Ran-domly, and make sure you will not mind before ordering.