433Mhz 4CH Garage Door Remote Control Entry Opener Wireless

Description:
1. Multiple work modes: inching, self‑locking, interlocking (bi‑directional jog / bi‑directional self‑locking) (bi‑directional jogging / bi‑directional interlocking).
2. Including 5 remote controllers, the maximum outdoor control distance up to 328.1ft, low interference.
3. Built‑in 120mAh CR2016 button battery, low power consumption and long service life, reliable to use.
4. Equipped with metal buckle for easy hanging and carrying. Exquisite workmanship, elegant appearance.
5. Manufactured according to the original production

Specificationss, in line with strict quality standards.


Specifications:
Item Type: Garage Remote Controller
Material: Metal + ABS
Battery Type: Button Battery (included)
Battery Capacity: 120mAh
Battery Model: CR2016
Remote Controller:
Working Voltage: DC6V
Working Current: ≤10mA
Working Frequency: 433.92MHz
Transmitting Power: Greater than or equal to 10mW
Transmitting Distance: 30-50m (open to ground).
Frequency Deviation: -0.2MHz-+0.2MHz
Transmission Speed: 50-60KHZ
Modulation Method: ASK
Oscillation Resistance: 330K
Operating Chip: for Ev1527 (remote control learning code)
Working Temperature: -20℃ to +70℃
Storage Temperature: -10℃ to +50℃
Receiver:
Working Voltage: AC/DC12-24V
Quiescent Current: 8mA
Working Frequency: 433MHz
Load Power: 10A per channel
Receiving Sensitivity: -dbm
Frequency Deviation: -0.2MHz-+0.2MHz
Coding Method: Learning type
Working Mode: Inching, self-locking, interlocking (bi-directional jog / bi-directional self-locking) (bi-directional jogging / bi-directional interlocking).
Modulation Method: ASK
Remote Control Distance: Approx. 100M/328.1ft (in the wild)
How to set the working model:
Power on first, press the "paired button" on the switch board once, indicator light on,receiver is waiting for pairing.
* Jog-lock(Momentary): Press "paired button" once
* Self-locking:Press "paired button" twice
* Interlock: Press "paired button" triple times
* 2 gang Jog-lock + 2 gang Self-lock:Press "paired button" 4 times
* 2 gang Jog-lock + 2 gang Interlock:Press "paired button" 5 times
* 2 gang Self-lock + 2 gang Interlock:Press "paired button" 6 times
* 2 gang Interlock + 2 gang Interlock:Press "paired button" 7 times
How to Clean Code:
* Press the Paired Button on the board 8 times, light flash, cleaning code successfully.


Package list::
1 x Receiver5 x Remote Controllers