4.3inch 12V Car Rear View Camera Monitor Backup Reverse Camera Kit Night Vision Reversing Parking Rear View System

Factory tested by high-pressure water immersion test and 12-hour power-on aging test, multi-layer waterproof design, truly high-pressure rinsing and immersion waterproofInstalled at the rear handle and license plate lights, with self-tapping screwsThe video cable is connected to the monitor, and the power cable is connected to the power supply of the taillight of the car. When the vehicle is reversing, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen.
Display size: 4.3 inchesDisplay format: 16:9 power less 3WPower: DC12VVideo: All the way to reverse the rear view input, all the way to DVD input, rear view priorityVideo input system: PAL/NTSC dual system automatic switchingReverse function: automatic switching between rear view and automatic wake-up function after connecting the cameraThe LCD monitor is small and convenient, the bracket can be moved up and down, and it can be adjusted according to the angle of view required by the customer. It can be made into a car monitor.Video format: NTSC\PAL automatic switchingDisplay: 4.3-inch TFT-LCD digital screen Resolution: 480 (H) X 272 (V)Input voltage: DC12VSignal input: two video inputs, one way back, one channel can be connected to DVD and other videosSuperhuman design, reversing automatic start, off-line self-power shutdown!
Precautions:For the microelectronic products of this product, please install, operate and use according to relevant national standards.Adapted to 12V automotive electrical systems, can not be installed in 24V electrical models.For the continuity between the parts, please connect with the dedicated line provided immediately.Care should be taken during installation to prevent flattening, puncture, cutting, and extension of each cable.Please install and maintain the system when the power is off.Daily maintenance and repairs are carried out by manufacturers or professionals.This product is not connected to the car brakes and is only used for parking assistance. If there is a parking accident, the product manufacturer has no obligation to bear legal responsibility.
Ultra-easy installation method:1. First wire the cable, red is connected to the positive pole of the power supply, and the negative pole is grounded.2. Install the camera and place the camera in the trunk.3. Plug in the camera and plug in the monitor4. Connect the power supplyEasy to solve all your car installation problems in four easy steps.
Key FeaturesImage sensor: PC7070Pixel: 756*720Image format: NTSC/PALDiagonal viewing angle: 170 degreesRated voltage: DC12VProtection level: IP67
What’s in the boxCamera + 4 m video cable (or DVD video cable) + 1 m DC power cable + self-tapping silk